Manualshelf

Use and Care Manual

ManualsBrandsTITAN ManualsFurniturePro Acro 3D Taupe Smart Massage Chair with Body Scan, Voice Controls, Smart Learning, Bluetooth, and Zero Gravity
11121314151617181920
Table Of Contents
3534
1.Enter the smart device main menu. Open "Settings" and select the "Bluetooth"
option. Open "Bluetooth", and Bluetooth will automatically "Search for a New
Bluetooth Device".
2.The smart device will search for the corresponding Bluetooth model (e.g. IMCM-
XXXX). Click the "Match" button. If you are asked whether to match with the
device, you just select "Match" to complete matching.
3.Turn on "Music Player" in the smart device and select the song to play.
VI.Operation Instructions for Bluetooth Speaker Play
V.Turn off the power and stop massage
·If the power button is pressed during massage, it will stop all the massage
functions immediately, and the backrest, the legrest and massage chair
manipulators will go back to the default positions. When the preset massage time
is up, all the massage functions will be off. The backrest and the legrest will not
go back to the default positions.
·Shut off the power supply of this product, as shown in the attached figure (Power
Shut-off Diagram of the Product).
VII.lnstallation Instructions for Legrest
·After connecting the wires and the air hose between the legrest and the massage
chair, remove the cable ties and insert the connecting part into the seat (Figure 1).
·Place the round tubes on the left and right sides of the legrest onto the legrest
support (Figure 2).
1 2
Method of Usage
PO
W
E
R IN
P
U
T
PO
W
ER I
N
PU
T
FUSE: T5AL 250V
O
N
/O
F
F
FUSE: T5AL 250V
ON
/
OF
F
·Next, turn the legrest fixing cover over to cover the round tubes on both sides of
the legrest (Figure 3).
·Fasten the legrest to the massage chair with two M4 screws (one on each side).
Check whether there is any abnormality during turning up and down, or any tube,
cable or wire is folded. If everything is OK, the legrest is installed (Figure 4).
Zipper
VIII. Instructions for Removal and Use of Head Cushion and Backrest
·The use of the head cushion can reduce the intensity of kneading massage on
the neck and shoulders. You can decide whether to use the head cushion
according to your own needs (the head cushion is recommended). The backrest
and the back cushion are connected by a zipper (1). The head cushion and the
backrest are connected by a zipper (2).
3 4
1 2
Zipper
Method of Usage
Schematic diagram of the whole machine power turning off.
Schematic diagram of unplugging the whole machine wiring.
Schematic diagram of unplugging the power plug.