TP- Cosmo MASSAGE CHAIR Operation Instructions SAVE THESE INSTRUCTIONS
Thank you for purchasing this product . Please read this manual instruction carefully in order to know how to use this product correctly before operation . Please pay more attention to some important safety warnings and keep this manual book properly for future use. Note: Our Company reserves the right to revise the design and description of this product without any further notice. Please refer to the actual color of this product.
Safety and Maintenance Safety and Maintenance 1.Important Safety Warning. ·Don’t make water go inside this product to avoid electric shock or cause damage to this product. ·Don’t damage the wires or change the circuit of this product. ·Don’t use wet cloth to clean the electric parts such as switch and plug. ·Be away from this product under power cut state to avoid injury if the power comeback suddenly. ·Stop using this product if abnormal, and please consult local agent immediately.
Safety warning Safety warning Warning Warning When the footrest is lifted, people should not apply pressure on the footrest to avoid the massage chair falling forward to damage the product or cause personal injuries. Do not strive to pull out the control cable or power cord during the standby or power-on state to avoid product damaged or electrocution accidents. It is advised that you unplug the controller cable and power cord and put away after use.
Name and function of components Function 1 2 3 4 5 6 ·This product has designed a set of automatic functions to help best aid your relaxation. ·There are four simulative massage techniques: finger pressing, kneading, tapping , tapping and kneading at same time. ·Equipped with shoulder automatic positioning detection.
Method of Usage Method of usage 1.LCD: LCD: Display all massage functions. ·Display all massage functions. 2.Power switch: ·Turn on or off all massage functions. 3.Pause \ run button: ·Pause or run all massage functions. 4.Timing key: ·Timing time adjustment 1 5.Automatic reclining key: ·There are three automatic reclining modes, which can automatically switch according to your own needs. 6.Footrest up key: ·Adjust footrest up. 7.
Method of usage Method of usage ·Automatic massage 1.Switch power supply on Function FUSE: T5AL 250V Diagram of plug in CONTROLLER JACK ON/OFF Button Comfort POWER INPUT Description Display Comfort: The most comfortable massage experience. F1 Auto Easy, soft, and comfortable massage, relieve body fatigue F2 Auto Frame and backrest frame rise and fall, and air pressure massage, and stretch or traction on the leg, remove fatigue, restore vitality.
Method of usage Method of usage ·Upper body manual massage Function ·Heated massage Massage ball adjustment Button Display Shiatsu: speed, width. Press this button to turn on/off the back infrared hyperthermia. Function Speed 5 speed adjustable. Width The width of the third gear can be adjusted. ·Adjust lying Angle Function Fixed position and spot massage. H0 Small area local round trip massage. H1 A round trip massage.
Method of usage Method of usage 3.Introduction of handrail shortcut keys Description Function The left arm Power button: Press this button to turn on or off all massage functions. To move to an upright position: Press this button to move the backrest up and footrest down slowly, it will stop once the button is released. To move to a down position: Lift up the button, the backrest will go down and footrest up slowly, it will stop once the button is released.
Method of usage Method of usage 4.Voice control operation 5.Bluetooth Player Operation ·When the massage chair is turned on or in standby mode, say “Alice Alice” to wake up the voice control function. ·After the successful wake-up, the massage chair will reply “I am here”. At this time, the voice control entry corresponding to the function is realized within 6 seconds.
Method of Usage Method of Usage ·Then turn the legs fixing cover over the round tube on both sides of the legs (figure 3) ·Then use 2pcs M4 screws to fix the legs on the massage chair , turn up and down to check if there are any problems to see if the wires and air hose get stuck or not, then finish the installation. (figure 4) 9.Floor Protection ·Please place the heavy massage chair on carpet, mat, or any soft object, for it may cause damage to wooden floors.
Product specification Model: TP-Cosmo Name: Massage Chair Rated voltage: 110-120V~ 60Hz 220-240V~ 50Hz/60Hz Rated power input:120W Rated time: 20Min Safety structure: Class I Material introduction: PVC, PA, steel parts and electric & electron parts MATERIAL PU LEATHER 20 CLOTH WOOD
