4D Fleetwood LE
Thank you for purchasing this product.Please read this user manual carefully before using to ensure proper operation. Please keep this USER MANUAL properly for future reference. CONTENTS 13) Do not use massager in close proximity to loose clothing or jewelry. 14) Keep long hair away from massager while in use. 15) Use heated surfaces carefully.May cause serious burns.Do not use over insensitive skin areas or in the presence of poor circulation.
SAFETY PRECAUTIONS SAFETY PRECAUTIONS Safety Precautions Before using, please read the SAFETY PRECAUTIONS carefully to ensure correct operation of this appliance. Best Circumstances Precautions and warnings listed below will help to ensure proper operation of this appliance. The classes of accidents caused by incorrect use are classified into WARNING and CAUTION.Read all WARNINGS and CAUTIONS below and follow all instructions within this manual.
NAME AND FUNCTION OF EACH COMPONENTS NAME AND FUNCTION OF EACH COMPONENT Controller External Structure Audio Speaker Head Pillow Armrest Seat Cushion Legrest Massage Unit Chair Yoga Back Cover Back Cushion Display Screen kneading Menu key to select function Power Box Caster Speed Force Width Rollre Power On/Off Shoulder Position Adjust ON/OFF UP/DOWNADJUST Menu Up Internal Structure Auto Massage Program MENU AUTO Left Right Confirm Down Mechanism Massage Unit Shoulder Massage Airbags
NAME AND FUNCTION OF EACH COMPONENTS NAME AND FUNCTION OF EACH COMPONENTS Controller Instructions Feet Down Press and hold to lower the Legrest Unit,release the button to stop. Power:Press this button to power on/off the remote control. Press this button while connected to power to show the menu display, the LCD Screen lights up,use the UP/DOWN/LEFT/RIGHT buttons to navigate the screen,press OK to select. Press this button again to turn off the product.
NAME AND FUNCTION OF EACH COMPONENTS Chair Yoga: Uses moderate kneading and stretching techniques to relax tired muscles and keep them flexible. Wake Up: Uses medium-high shoulder-pressing & invigorating wake up technique to stimulate and move the body's stressed muscles and set the tone for the entire day. NAME AND FUNCTION OF EACH COMPONENTS Manual Program Press Manual from Menu display,press Up or Down button to navigate among:Mode, Part,Width,Speed,Roller,Zero and Knee.
NAME AND FUNCTION OF EACH COMPONENTS NAME AND FUNCTION OF EACH COMPONENTS Air Pressure Massage Roller: Press Roller from Manual display,press Right button then press Up or Down button to navigate among:foot roller speed level 1,2,3,or Off (deactivate foot roller mechanism) . Press OK button to enter the speed level you desire. (Foot roller speed is not adjustable if Full Body Airbag or Leg & Foot Airbag is selected.
NAME AND FUNCTION OF EACH COMPONENTS Settings Press Settings from Menu display,then press Up or Down button to navigate among:Time, Language and Bluetooth. Menu Settings Auto Time Settings 10mins Time Manual Language 20mins Language 4D Massage Bluetooth 30mins Bluetooth 中文 EN Airbags NAME AND FUNCTION OF EACH COMPONENTS Tips: In the process of Auto or Manual Setting,LCD screen will auto revert back to the homescreen after 10 seconds if there is no operation entered into the remote control.
NAME AND FUNCTION OF EACH COMPONENTS NAME AND FUNCTION OF EACH COMPONENTS Features Control Panel of the Armrest(see below figure) Power/Auto Program button:Press this button to start the chair when connected with power,press this button again to start the auto program;press and hold this button for 2+ seconds to power off the massage chair. 1.
PRELIMINARY CHECKS Clearance Space Clearance space for the massage chair: Ensure there is an adequate clearance for the installation: It needs 10cm clearance for the recline of the backrest; It needs 60cm clearance for the raise and extension of the footrest; Make sure there is 10cm clearance behind the backrest and 60cm clearance in front of the footrest. Keep it 1 meter away from the TV,radio or other audio&video appliance to avoid signal interference.
PRELIMINARY CHECKS PRELIMINARY CHECKS Installation Method Step 3:Install The Legrest Unit Step 1: Take all massage chair units out of the cartons Unpack the cartons:take out all upholstery unit,accessories out of the cartons.
PRELIMINARY CHECKS PRELIMINARY CHECKS Connect the legrest unit with the Coupling Shaft,fit the DK Circlip to the end of the shaft and lock it(check the illustration below) DK Circlip Coupling Shaft Step 4:Install the controller unit Take the controller unit out of the accessories box; Connect the data line of the controller to the port to the lower inner side of the right armrest(pay attention to the convex and concave of the connector and port),then tighten the screw cap clockwise.
PRELIMINARY CHECKS Step 5:Other Accessories Connect the power cable to the product power socket located at the power box of the product.(Check below illustration for reference) Switch ON the power by the lower outer side of the right armrest,raise the backrest of the product to fully upright position. PRELIMINARY CHECKS Move Method Roll the chair on its casters to the desired location. Incline the backrest to upright position. Turn off the power switch and unplug the appliance from the electrical outlet.
PRELIMINARY CHECKS PRELIMINARY CHECKS Footrest Extends/Retracts Commissioning Use the controller to recline the backrest to the ultimate angle,lift and extend the footrest to the maximum, make sure there is enough clearance before commissioning. Reset the chair after commissioning and turn off the power switch.
CARE AND MAINTENANCE Care Instructions To treat stains on back panel,armrest,footrest,plastic parts or air hose,spot clean with mild detergent foam,then wipe it with a dry cleaning cloth. To treat stains on controller,power box,spot clean with a dry cleaning cloth. To treat stains on back cushion or pillows,use a water-based upholstery cleaner only,wipe it with moist cloth,then air dry. To clean the foot/calf unit covers,remove it from the chair,hand wash with a mild detergent, then line dry.
PRODUCT SPECIFICATIONS Product name: Titan Massage Chair Model number: 4D Fleetwood LE Rated voltage: 110-120V~ Rated frequency: 60Hz Rated current: 1.
