Use and Care Manual

PRELIMINARY CHECKS
23
Commissioning
After Operation
Use the controller to recline the backrest to the ultimate angle,lift and extend the
footrest to the maximum, make sure there is enough clearance before commissioning.
Reset the chair after commissioning and turn off the power switch.
(To choose the massage program, please check the Instruction of Controller and
Instruction of Display Screen for reference)
CAUTION
Do not take seat while the legrest is lifted.
Do not put excessive load on the legrest to avoid damage.
Always unplug the massage chair from the electrical outlet immediately after using.
Put the controller into the controller pocket.
Turn off the power switch and unplug the massage chair from the electrical outlet
while not in use to avoid children start the massage chair accidentally.
When not in use for a long period of time,we recommend that the chair be covered,
the power cord be coiled and that the unit be placed in an environment free of dust
and moisture.
Press and hold or button on the controller to extend or retract
the footrest to the length you desire for better massage experience,release the button to
fix the position.
PRELIMINARY CHECKS
Footrest Extends/Retracts
Footrest Extended
Footrest Retracted
A footrest sensor is set at the bottom of footrest,the footrest will adjust the length
automatically once the chair started.
WARNING
Do not play on the massage chair or operate it improperly.
Ensure there is no obstruction when raising or reclining the backrest and footrest.
Do not place foot,fingers or any other objects in the space between the seat and
the backrest/footrest when it is in the reclining or raising motion.
Ensure massage chair is restored back to its original position before getting off
the massage chair.
Instructions on Connecting audio to the massage chair
speakers via Bluetooth(Android/Apple iOS)
On your Android/Apple iOS device, go to Settings > Bluetooth and turn on Bluetooth.
Place your massage chair in discovery mode and wait for it to appear on your Android/
Apple iOS device. Choose RT7709S to pair,when it displays Bluetooth connected, it’s
set to go.
CAUTION
The massage chair power and the Bluetooth need to set to On while pairing.
If the pairing failed, try to connect again.
Always unplug the massage chair from the electrical outlet immediately after using.
Put the Controller into the Controller Pocket.
Turn off the power switch and unplug the massage chair from the electrical outlet
while not in use to avoid children power on the massage chair accidentally.
When not in use of a long period of time,we recommend that the chair be covered,
the power cord be coiled and that the unit be placed in an environment free of dust
and moisture.
24