Use and Care Manual

NAME AND FUNCTION OF EACH COMPONENTS
Control Panel of the Armrest(see below figure)
Power/Auto Program button:Press this button to start the chair when connected with power,press
this button again to start the auto program;press and hold this button for 2+ seconds to power off
the massage chair.
Back Inclines:Press and hold to incline the backrest to upright position;Release the button to stop.
Back Reclines:Press and hold to recline the backrest;Release the button to stop.
Time: Set the working time for the appliance,may choose 10min,20min or 30min.
Pause:Press the Pause button to temporarily stop running the massage program, press this button
again to continue.When the massage chair is paused,the Pause button and the Power/Auto Program
button on the Control Panel of the Armrest are enabled, the Power button on the remote controller is
enabled.All other buttons are disabled.
Pause:Press the Pause button to temporarily stop running the massage program, press this button
again to continue.When the massage chair is paused,the Pause button and the Power/Auto Program
button on the Control Panel of the Armrest are enabled, the Power button on the remote controller is
enabled.All other buttons are disabled.
Back Heat:Press to activate level-2 back heat or turn off heat function.
Air Pressure: Press to adjust the air pressure intensity from level-1 to level-5.
Air Pressure Massage
Back&Leg Heat
Timer
Back Recline
Pause
Back Incline
Power/Auto Program
13
Features
1. One Press Control Sliding
It will slide forward by 16cm and recline afterwards,glider recliner linkage mechanism to
save space and provide utmost relaxing position.
2. Zero Gravity Position
Developed by NASA scientists,the Zero Gravity technology has incorporated into our
massage chair design,at such a weightless position that the height of the legs slightly
higher than the upper body,the weight of body can evenly distributed throughout,reducing
the pressure of the spine and joints both physically and mentally.
3. Human Hand Quad Style Massage Mechanism
Innovative human hand quad style massage mechanism and L-shaped guiding track
conform to ergonomic principle.
4. Auto/Manual Footrest Extension
The footrest can extend by 16cm automatically for various users of different height
ranges.
5. Whole Body Air Pressure Massage
Whole body air pressure massage for arms,back,waist,legs and feet.
6. Roller Massage
3 underfoot rollers provide hand simulation rolling and shiatsu massage underfoot for the
reflex zone.
7. Versatile Massage Techniques
Mimic human hand kneading,knocking,sync,tapping,shiatsu and 3D shiatsu massage
techniques for custom-tailored relaxation.
8. Pressure Sensitive Mechanism
Pressure sensing system is built in the mechanism of this massage chair, when the Auto
massage program is running, the massage techniques will adjust the mechanism 3D
protruding intensity to suit the users personal preferences.
14
NAME AND FUNCTION OF EACH COMPONENTS