Instructions / Assembly

(Fig. 20)
(Fig. 17)
(Fig. 18)
(Fig. 19)
TMPSI 06.12
7.
Hold the aluminum bracket in place on
the end of the rail; mark the bottom of
the aluminum bracket onto the post
(Fig. 15).
Push the rail aside. Pre-drill and attach
the aluminum bracket (Fig. 16). (Bottom
rail bracket installation depicted.)
Repeat at the top of the stair section.
Place the assembled rail section into
the four aluminum brackets and secure
with 2 set screws in each bracket (Figs.
17 and 18).
(Fig. 15)
(Fig. 16)
8.
Install bracket covers by wrapping them
around the rails and aluminum brackets.
Press the attachment tabs up into the
slots of the aluminum brackets (Figs. 19
and 20).
Snap trim rings around bottom  ange
of support post. Attach post cap, sold
separately, using vinyl adhesive.