AIR CONDITIONER REMOTE CONTROLLER ILLUSTRATION The design and specifications are subject to change without prior notice for product improvement. Consult with the sales agency or manufacturer for details. Thank you very much for purchasing our air conditioner. Please read this owner's manual carefully before using your air conditioner.
Handling the remote controller CONTENTS Location of the remote controller. Use the remote controller within a distance of 8 meters from the appliance, pointing it towards the receiver. Reception is confirmed by a beep. Handling the remote controller ...................................................... 2 Remote controller Specifications................................................... 3 Function buttons .................. .........................................................
CAUTIONS 1 TEMP DOWN Button Function buttons Do not mix old and new batteries or batteries of a different type. Do not leave the batteries in the remote controller if it is not going to be used for 2 or 3 months. Dispose of the old batteries in the special containers to be found in the sales outlets. Push this button to decrease the indoor temperature setting in 1oC(2 F) increments to 30oC(88 F).
Indicators on LCD Function buttons(continued) FAN HIGH MED LOW Displays the current selected mode. Including AUTO, COOL, DRY, HEAT (cooling & heating models only) and FAN. 10 TIMRT OFF Button TEMP Press this button to activate the Auto-off time setting. Each press will increase the time setting in 30 minutes increments, up to 10 hours, then at 1 hour increments up to 24 hours. To cancel the Auto-off time setting, just press the button until the time setting is 0.0.
How to use the buttons Dehumidifying operation SET TEMPERATURE( C) Auto operation FAN HIGH MED LOW AUTO COOL DRY HEAT TEMP 2 ON/OFF FAN SPEED MODE 3 1 SWING ECONOMY RESET LOCK TIMER ON TIMER OFF LED DISPLAY Ensure the unit is plugged in and power is available. The OPERATION indicator on the display panel of the indoor unit illuminates. 1. Press the MODE button to select Auto. 2. Press the TEMP button to set the desired temperature.
Timer operation press the TIMER ON button can set the auto-on time of the unit. And press the TIMER OFF button can set the auto-off time of the unit. SET TEMPERATURE( C) AUTO COOL DRY HEAT FAN HIGH MED LOW TIMER ON TEMP MODE SWING ON/OFF FAN SPEED ECONOMY TIMER ON 1 RESET LOCK TIMER OFF 2 LED DISPLAY To set the Auto-on time. 1. Press the TIMER ON button. The remote controller shows TIMER ON, the last Auto-on setting time and the signal "h" will be shown on the LCD display area.
TIMER OFF TIMER OFF Example: To stop the air conditioner in 10 hours. 1. Press the TIMER OFF button, the last setting of stopping operation time and the signal "h" will show on the display area. 2. Press the TIMER OFF button to display "10h" on the TIMER OFF display of the remote controller. 3. Wait for about 3 seconds and the digital display area will show the temperature again. Now this function is activated.
NOTE: -Buttons design is based on typical model and might be slightly different from the actual one you purchased, the actual shape shall prevail. -All the functions described are accomplished by the unit, if the unit has no this feature, there is no corresponding operation happened when press the relative button on the remote controller. -When there are wide differences between Remote controller Illustration and USERS MANUAL on function description, the description on USERS MANUAL shall prevail.
