Use and Care Manual

ManualsBrandsTiTAN ManualsHeating, Ventilation, and Air Conditioning12000 BTU Portable Air Conditioner for up to 450 sq. ft.

Function buttons(continued)

TIMRT OFF Button

LOCK Button

55 66

Model: RG51B1/(C)EU,

RG51B/(C)EU,

RG51B26/(C)EU,

RG51B30/(C)EU,

RG51B31/(C)EU.

NOTE: RG51B/(C)EU models

have no SWING and FOLLOW ME

buttons ;RG51B1/(C)EU models

have no FOLLOW ME button;

RG51B30/(C)EU models have no

SWING ,FOLLOW ME buttons and

MED FAN feature,and SLEEP button

instead of ECONOMY button;

RG51B31/(C)EU models have on

FOLLOW ME button.

TEMP

AUTO

COOL

DRY

HEAT

FAN

HIGH

MED

LOW

MODE

FAN SPEED

SWING

TIMER ON

ECONOMY

ON/OFF

TIMER OFF

RESET LOCK

SET TEMPERATURE( F)

LED

DISPLAY

NOTE: While the unit is running under SLEEP mode,

it would be cancelled if ON/OFF, FAN SPEED, SLEEP

or MODE button is pressed.

Press this button to activate the Auto-off time

setting. Each press will increase the time setting

in 30 minutes increments, up to 10 hours, then at

1 hour increments up to 24 hours. To cancel the

Auto-off time setting, just press the button until

the time setting is 0.0.

Press this recessed button to lock all current

settings, and the remote controller will not accept

any operation except that of the LOCK. Use the

LOCK mode when you want to prevent settings

from being changed accidentally. Press the LOCK

button again to cancel the LOCK function. A lock

symbol will appear on the remote controller display

when the lock function is activated.

TIMER ON OFF

SET TEMPERATURE

Transmission Indicator

Temp./Timer display

FAN SPEED display

MODE display

ON/OFF display

This transmission indicator will light when remote

controller transmits signals to the indoor unit.

Displays the current selected mode. Including AUTO,

COOL, DRY, HEAT (cooling & heating models only)

and FAN.

The temperature setting (from 17 C(62 F) to

30 C(88 F)) or timer setting (0~24h) will be displayed.

If FAN mode is selected, there will be no display.

This indicator will be displayed when

the unit is operating.

Displays the selected fan speed: AUTO, HIGH, MED

and LOW. Nothing displays when the fan speed is

selected in AUTO speed. When AUTO or DRY Mode

is selected, there will be no signals displayed.

This display area shows the settings of the TIMER.

That is, if only the Auto-on time function is set, it will

display TIMER ON. If only the Auto-off time function

is set, it will display TIMER OFF. If both functions are

set, it will display TIMER ON OFF which indicates you

have chosen both the Auto-on time and Auto-off time.

LOCK display is displayed when pushing the LOCK

button. Push the LOCK button to clear display.

MODE display(FAN mode)

TIMER display

LOCK Indicator

Indicators on LCD

Press this button to clear the display on the

indoor unit, press it again to light the display .

LED Display Button

TEMP

AUTO

COOL

DRY

HEAT

FAN

HIGH

MED

LOW

MODE

FAN SPEED

SWING

TIMER ON

SLEEP

ON/OFF

TIMER OFF

RESET LOCK

SET TEMPERATURE( F)

TEMP

SENSING

LED

DISPLAY

ION

Press this button to initiate FOLLOW ME function.

When the Follow Me function is activated, the

remote display is actual temperature at its location.

The remote control will send this signal to the air

conditioner every 3 minutes interval until press

the Follow Me button again.

The Follow Me function is not available under

DRY and FAN mode.

Switch the operation mode or turn off the unit will

cancel the follow me function automatically.

FOLLOW ME/TEMP SENSING Button

Model: RG51B17/(C)EU

When push this button, the ion generator is

energized and will help to remove pollen and

impurities from the air.

ION Button

NOTE: RG51B18/(C)E ,RG51B19/(C)E-M,

RG51B20/(C)E models have no this feature.

NOTE: RG51B19/(C)E-M model has no MED

FAN speed feature.

FOLLOW ME display

When pressing FOLLOW ME/TEMP SENSING button

in COOL or HEAT mode, the remote sensing function

is activated and this indicator displays.