Use and Care Manual

Reversing the Door Swing of Your Appliance

USER GUIDE

www.titan-appliances.com

Note: Compatible with framed overlay panels only.

3. Unscrew 2 screws and remove the door switch cover (5). Unscrew 2

screws and remove the door stopper (6).

Remove 2 screws from the right upper hinge connecting plate (7) mounted

on top of the door and remove it. Rotate the door 180 degrees upside

down.

Take out the new left upper hinge connecting plate and door stopper from

the hardware package and install them with 2 screws.

4. Remove the 3 black decorative nails (8) from the top left

of the cabinet.

Install the black decorative covers to the top right of the

cabinet and install the new top hinge (9) from the hardware

package at the top left of the cabinet with 3 screws.

5. Install the lower door axis (1) and the door switch cover

(5), then install the door once correctly aligned. Secure the

door with the screw on top of the hinge (9).