Use and Care Manual

USER GUIDE
www.titan-appliances.com
21
Power
Press and hold this button for three seconds to power your unit on. Once pressed, the "Run" indicator light will
illuminate to indicate the unit is on and running. Press and hold this button for three seconds again and the
unit will power off and the "Run" indicator light will turn off.
+ Button
Press this button to increase the setting temperature by one (1) degree increments.
- Button
Press this button to decrease the setting temperature by one (1) degree increments.
Light
Press this button to cycle between three internal light colors.
This refrigerator is equipped with internal lights that can be set to Blue , White or Amber.
You can choose to display each color of light in two different modes: Display mode and Automatic Mode.
* Display Mode
The internal lights will stay constantly illuminated whether the door is open or closed. Display Mode is a
custom/user-defined function, not a regular day to day function
* Automatic Mode
The internal lights will illuminate each time the door is opened and fade off once the door is closed. This feature
is triggered by a sensor located on the front vent. This sensor allows the refrigerator to recognize when the
door is open or closed.
*The default mode is Automatic Mode. To change between modes, press and hold Light button for 3 seconds.
We test every unit that we produce in our factory. Because of this, your model may default to any of the
above settings out of the box. Simply cycle through the progression of settings until you reach your desired
setting.
Tip: Close the door to determine if the light is currently in Display Mode or Automatic Mode. In Display Mode
the lights will remain on, and in Automatic Mode the lights will fade off once the door is closed.