Use and Care Manual

USER
GUID
E
www.titan-appliances.com
22
Energy Saving (Sabbath Mode)
Energy Saving mode disables system responses to user-initiated activities and all external functions, including
lighting, display and audible alarms. The unit will maintain internal temperatures and set points.
To enable or disable this mode, press the Energy Saving button . The interior light and control display will go dark
until the user disables Energy Saving mode.
Although the display will not be visible, the temperature settings will remain active and preserve the internal
temperature. Energy Saving mode will remain active until it is disabled by the user.
Temperature Memory
This appliance has a temperature memory function. The temperature setting is automatically save. In case of
a power outage, the temperature setting will remain when power resumes.
Temperature Alarm
If the interior temperature is higher than 81°F (27°C), “HI” is shown on the display panel and the buzzer alarm
sounds continuously after one hour. This indicates that the inner temperature is too high. If the inner temperature is
lower than 28°F (-2°C), “LO” is shown on the display panel, and the buzzer alarm will go off after fifteen minutes. In
either case, immediate attention is advised.
Door Alarm
This unit is equipped with an audible alarm to alert you when the door has been left open.
If at any time the door has been left open for more than 3 minutes at a time, the alarm will sound and it will
continue to sound until the door is closed completely or the unit is powered off.