Operation Manual

Max.
-1
xxxxx min
Max.
-1
xxxx min
-1
Maximum rotational frequency of the shaft for the cutting attachment in min
Inspect the area where the product is to be used and remove all objects which
can be thrown by the product. If objects are hidden while operating stop the
engine and remove the object.
Contact of the guide bar tip with any object should be avoided.
Do not touch the cutting device until it stops completely.
Guaranteed sound power level
Correct direction of cutting-teeth.
Location of starter handle: pull upwards
Refill chain oil
Keep other people out of working area during operation. A distance of at least
15 m must be observed.
Risk of long hair being drawn into air inlet.
Risk of loose clothing being drawn into air intake.
16
25CC PETROL MULTI TOOL TTK587GDO