Operation Manual

28
25CC PETROL MULTI TOOL TTK587GDO
6. Remove the spindle lock rod (E3)
WARNING! Do not attach the locking flange (B6) when using the trimmer head!
Fig. 8
B3
B9
B4
B11
E3
Brush Cutter/Grass Trimmer Attachment Assembly
Fit the brush cutter/grass trimmer shaft to the main unit.
1. Align the brush cutter/ grass trimmer shaft (B14) with the clamp (A12) so that the hole in
the extension is orientated to the locking pin. (See Fig. 9a)
Fig. 9a
2. Pull out the locking pin (A13) and insert the extension (A21) into the clamp (A12). Release
the locking pin and ensure it engages in the hole. (See Fig. 9b)
Fig. 9b