Operation Manual

4. In case of emergency, pull the rope of the quick release mechanism. The metal locking bar

will be released from the securing clip automatically because of the weight of the machine,

and the machine will drop away from you. (See Fig. 16)

Fig. 16

25CC PETROL MULTI TOOL TTK587GDO

3. Adjust the length of the harness (A8) so that the hook is approximately 15 cm below your

waist; locate the product to the harness by using the securing clip ensuring that the angle

of the cutting head is parallel to the surface being cut. (See Fig. 15)

WARNING! Always attach the product to the harness.

Fig. 15