Operation Manual

Brush Cutter
WARNING! To avoid hazards never cut heavier weeds, brush and similar vegetation
with a thickness of over 20mm. Avoid contact with stones, wire, glass etc. that may
cause injury to the user! Inspect the blade regularly for damage, cracks or breaks!
Always replace a damaged blade!
WARNING! When working with the cutter blade there is always a risk of kickback if the
cutting head comes into contact with a hard object! Kickback will cause the sudden
stalling of the cutting head, which in turn results in the cutting head being forced in the
opposite direction to the rotation of the cutter blade! Ensure that you retain a firm grip
with both hands at any sign of such kickback, pay attention and retain a firm stance to
avoid injuries!
1. Use the cutter blade (B5) to cut heavier weeds, brush and similar vegetation with a
thickness of up to 20mm.
2. Hold the product firmly so that it sits with a gap between the product and your right side.
3. Stand upright, do not lean forward and pay attention to posture. Keep both feet apart to
help retain your balance.
4. Never hold the cutting head higher than your hip; the higher you hold the cutting head will
increase the risk of objects being thrown. (See Fig. 24)
5. Carefully plunge the blade from above when cutting long undergrowth.
6. Move the cutting head towards the base of young trees or thicker vegetation.
Grass Trimmer
1. Use the trimmer head (B11) to cut smaller types of weed, lawn grass or similar soft vegetation.
2. Remove the protection cap from the line cutter (B10).
3. Hold the product firmly so that it sits with a gap between the product and your right side.
4. Stand upright, do not lean forward and pay attention to posture. Keep both feet apart to help
retain your balance.
5. Hold the trimmer head just above the ground at an angle of approximately 30°. (See Fig. 25)
Fig. 25
38
25CC PETROL MULTI TOOL TTK587GDO
max. height : 300 mm
Fig. 24