Operation Manual

6. Move the product with slow and regular arc from left to right before moving it back to the

starting position before trimming the next area. (See Fig. 26)

Fig. 26

7. Ensure the cutting head remains clean and free from off-cuts that may cause it to jam.

Check regularly. Stop the engine, switch the ignition switch (A19) to “STOP” and remove

the spark plug connector (A2) before checking.

8. Trim longer grass in stages, do not cut long grass in one cut. For the best results, cut longer

grass in steps. (See Fig.27a, 27b)

Fig. 27a

Fig. 27b

9. The trimmer head is equipped with a bumper (B13) helping to cut the trimming line (B12)

while operating. Simply tap the bumper on a firm surface and the spool will release fresh

trimming line. (See Fig. 27c)

Fig. 27c

10. A line cutter (B10) is integrated with the trimming guard (B9) and this will cut the line to

the necessary length. (See Fig. 27d)

WARNING! The cut line will be thrown out! Danger of injury especially for bystanders!

B10

Fig. 27d

25CC PETROL MULTI TOOL TTK587GDO