Operation Manual

25CC PETROL MULTI TOOL TTK587GDO

3. ASSEMBLY INSTRUCTIONS......................................24

INTENDED USE ..............................................................................24

Unpack .......................................................................................24

AUXILIARY HANDLE ASSEMBLY .....................................................24

Adjusting The Handle ...................................................................25

Attachments ................................................................................25

BRUSH CUTTER/GRASS TRIMMER GUARD ASSEMBLY ..................26

Brush Cutter Guard Assembly .......................................................26

Grass Trimmer Guard Assembly ....................................................27

BRUSH CUTTER BLADE ASSEMBLY ...............................................27

GRASS TRIMMER ASSEMBLY .........................................................27

Brush Cutter/Grass Trimmer Attachment Assembly .........................28

HEDGE TRIMMER ATTACHMENT ....................................................29

Hedge Trimmer Shaft ...................................................................29

POLE PRUNER ACCESSORY ..........................................................29

Saw Chain Tensioning ..................................................................29

CHAIN LUBRICATION .....................................................................31

Filling Chain Oil ...........................................................................31

Checking Chain Oil ......................................................................31

Pole Extension Attachment Assembly ............................................32

HARNESS ......................................................................................32

4. OPERATING INSTRUCTIONS ....................................34

FUEL AND ENGINE OIL ...................................................................34

STARTING INSTRUCTIONS ............................................................35

Cold Start ....................................................................................35

Warm Start ..................................................................................36

OPERATION ...................................................................................37

STOPPING .....................................................................................37

GENERAL BEHAVIOUR ...................................................................37

Brush Cutter ................................................................................38