Operation Manual

1. SAFETY INSTRUCTIONS
Warning! Read these instructions carefully before operating this tool. Make
sure that you are familiar with the controls and know how to properly operate
the machine. By following these instructions, you can reduce the risk of fire,
electric shock and personal injury.
GENERAL SAFETY INSTRUCTIONS
1. This product is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the product by a person
responsible for their safety.
2. Children should be supervised to ensure that they do not play with the product.
IMPORTANT
Read carefully before use
Keep for future reference
3. Read the instructions carefully. Become familiar with the instruction manual before
attempting to operate the product.
4. Never allow children or people unfamiliar with these instructions to use the product. Local
regulations can restrict the age of the operator.
5. Never operate the product while people, especially children, or pets are nearby.
6. Keep in mind that the operator or user is responsible for accidents or hazards occurring to
other people or their property.
Preparation
1. This product can cause serious injuries. Read the instructions carefully for the correct
handling, preparation, maintenance, starting and stopping of the product. Become familiar
with all controls and the proper use of the product.
2. Never allow children to use this product.
3. Avoid operating while people, especially children, are nearby.
4. Dress properly! Do not wear loose clothing or jewellery which can be caught in moving
parts. Use of sturdy gloves, non-skid footwear and safety glasses is recommended.
5. Take extra care when handling fuel. They are flammable and the vapours are explosive.
The following points should be observed:
- Only use approved containers to store fuel.
- Never remove the fuel tank cap or add fuel with the power source running. Allow engine
and exhaust components to cool down before refuelling.
- Do not smoke when operating fuelling, or starting this machine.
- Never refuel indoors or in confirmed spaces.
- Never store the product or fuel container inside where there is an open flame, such as
near a boiler.
- If fuel is spilled, do not attempt to start the product, but move it away from the area of
spillage before starting.
- Always replace and securely tighten the fuel tank cap after refuelling.
- Drain fuel outdoors only.
6. If the cutting mechanism strikes any foreign object or the product starts making any
unusual noise or vibration, shut off the power source and allow the product to stop.
Disconnect the spark plug wire from the spark plug and take the following steps:
06
25CC PETROL MULTI TOOL TTK587GDO