Operation Manual
Maintenance and storage
1. Improper maintenance and removal of safety devices leads to hazards causing injuries and
damage to property.
2. When the product is stopped for servicing, inspection or storage, shut off the power source,
disconnect the spark plug connector from the spark plug and make sure all moving parts
have come to a stop. Allow the product to cool before making any inspections, adjustments,
etc.
3. Always store the product and fuel so that there is no risk of leakages or fumes coming into
contact with sparks or naked flames from electrical equipment, electric motors,
relays/switches, boilers etc. Always allow the product to cool down before storing.
4. When not in use store the product out of the reach of children.
5. Use only manufacturers recommended replacement parts and accessories.
6. When transporting or storing the product, always fit the transportation guards.
7. Correctly secure your product when transporting in a vehicle to prevent turnover, fuel
spillage and damage to the product.
8. For longer periods of storage or transportation the fuel and oil tanks must be emptied.
Dispose of waste fuel and oil at a local petrol station, local authority centre or where
facilities exist.
Brush cutter and grass trimmer safety instructions
1. Wear head protection, where there is a risk of falling objects.
2. Wear eye protection (goggles or face shield).
3. Wear ear protection.
4. Wear foot protection and gloves (on brush cutters).
5. Keep a distance between the product and bystanders of at least 15 m.
6. Beware of thrown object.
7. Take care against injury from any device fitted for trimming the filament line length. After
extending new cutting device line always return the product to its normal operating position
before switching on.
Pole mounted hedge trimmer safety instructions
1. Keep all parts of the body away from the cutter blade. Do not remove cut material or hold
material to be cut when blades are moving. Make sure the product is switched off when
clearing jammed material. A moment of inattention while operating the product may result
in serious personal injury.
2. Carry the product by the handle with the cutter blade stopped. When transporting or storing
the product always fit the cutting device cover. Proper handling of the product will reduce
possible personal injury from the cutter blades.
3. Hold the product by insulated gripping surfaces only, because the cutter blade may contact
hidden wiring. Cutter blades contacting a "live" wire may make exposed metal parts of the
product "live" and could give the operator an electric shock.
4. Check the hedge for foreign objects before operation, e.g. wire fences.
5. Hold the product properly, e.g. with both hands if two handles are provided. Loss of control
can cause personal injury.
6. Beware of overhead power lines. Do not use the product in any position that causes any
part to come within 10m of overhead electrical lines.
08
25CC PETROL MULTI TOOL TTK587GDO