TX-400 T User Manual Digital Terrestrial Receiver with USB socket
INTRODUCTION This User Manual will help you to operate your Satellite Receiver in a safe manner while enjoying all the features and benefits it provides for your entertainment The instructions contained in this User Manual assume that the user of the Satellite Receiver already has a basic general knowledge on how to operate entertainment electronic devices This User Manual must be read by every person that is: • Installing • Connecting • Operating • Cleaning • Disposing of this Satellite receiver DISPOSAL O
Table of contents Safety Instructions 4 The right location 4 Front Panel / Rear Panel 6 Remote Control Unit 7 S.T.B Connection 9 Main Menu 11 Digital TV Part 11 1. Installation 11 2. Channel Manager 13 3. Configuration 16 4. Software Upgrading 19 5. Factory default 20 6. Version 20 USB Media Play Part 20 1. Movie 20 2. Music 21 3.
Safety precautions Before operating the receiver, please read thoroughly the following safety precautions You are required to read all the notes, instructions and warnings contained in this User Manual Basic safety precautions Connecting to the mains · During disturbances unplug the receiver from the mains. · To avoid the risk of fire and electric shock do not expose the receiver to rain or other humidity. · Never open the housing. Otherwise there is the risk of electric shock.
The right location Place the receiver on a stable, even surface. Avoid placing it near: Heating sources, like radiators, Naked flames, like candles, Devices with strong electromagnetic fields, like speakers. Do not place objects filled with liquids (such as vases) on the receiver. · Avoid direct sunlight and exceptionally dusty places. · Never cover the ventilation openings. Ensure sufficient ventilation of the receiver. · Do not place heavy objects on the receiver.
Front Panel/ Rear Panel Front Panel USB slot Rear Panel (1) TV ANT IN: Use to connect an antenna. (2) LOOP OUT: Use it when connecting to another STB. (3) TV/VCR SCART: For the Video/Audio input of the TV and VCR. (4) (5) (6) SPDIF: SPDIF audio format output system. AUDIO L/R: 3.5MM Jack for connecting the audio RCA or earphone.
Remote Control Unit 7
Remote Control Unit 1 2 3 4 5 6 7 8 9 10 STANDBY NUMBERIC BUTTONS FAV PAGE UP VOL (◄/►) OK MENU CH (▲/▼) TXT EPG 11 12 13 14 15 16 17 18 19 20 21 22 23 24 GAME AUDIO BACKWARD ZOOM FORMER FORWARD NEXT MUTE PAUSE PAGE DOWN EXIT TIMER SUBTL INFO 25 26 27 28 29 30 31 TV/RADIO SCAN RECALL STOP PAUSE PLAY SLOW Switch between Operation and Standby mode Changes channels or selects the menu options.
S.T.B Connection Various equipment and TV/VCR can be connected to STB. This manual will explain common ways to connect to the equipment. If you experience any problem, please contact your sales agency. 1. How to connect the STB to a TV set (1) Connect one end of the SCART cable to the TV SCART socket on the back of the STB and the other end to the SCART input socket on your TV. (2) Connect the Antenna cable to TV ANT IN collector of the STB.
S.T.B Connection 2. How to connect the Audio system ① Connect the AUDIO R/L socket of the STB to the Audio System like HI-FI, Amplifier, etc. ① Audio System must capable of stereo audio ability. ③If Digital Audio or S/PDIF Optical output are available on STB, you can get better stereo experience.
Main Menu Plug in the STB, the Main Menu screen, the beginning of the OSD screen, will appear as shown in the following picture. The Main Menu displays various functions of the STB or you can select with “CH” buttons and the numeric buttons on the remote control. To proceed to the next stage, press the “OK” button on the remote control. DIGITAL TV Plug in the STB, and power on, there are foreign languages for your choice, choose the one you prefer. Then, press “Menu” on the remote control to get started.
1.2 Manual Search If you are familiar about digital TV and know the frequency of the program or if you want to scan the program at any frequency required, you can select manual scanning, which can save your much time. 1) You can move the cursor to “area search” via press “UP/DOWN” key under “installation menu”, then press “enter” to enter into area searching page. 2) Prior manual scanning, you need to configure relevant parameters including: 1.
1. 3) 4) Start Freq (KHz): the default frequency is 474000KHz. You can input relevant details to modify it; 2. End Frequency (KHz): the default frequency is 474000KHz. You can input relevant details to modify it; Press “ENTER” key after configuration of parameters to start manual scan. If any program is detected and the scanning process is finished, system will exit the scanning page and save the program. 2.
2.2 Channel Sorting Channel Sorting enable the channels be listed according to certain sequence so that the user can easily find them. 1) Before sorting, the type of sorting shall be set, including the following items: 1. First Option: choose the programs to be sorted via the selection area; 2. Second Option: Press FTA (free of charge), Scramble (encrypted), ALL Free and Encrypted Channels; 3. Third Option: According to alphabetic order A-Z, or Z-A; 2.
2.4 Edit Channel This function enables you to do such operations as Add, Delete and Rename to channels. 1) Press the RED button to enter Add Channel menu. 2) Under Add Channel menu, there are 6 parameters for adding one channel as follows: 1. Area Name: For Area Name, press the RIGHT button to enter the Area Name list on the right, then press UP/DOWN button to choose area name, ENTER button to confirm. 2. Carrier: Press LEFT/RIGHT button to choose; 3.
3. Configuration Configuration provides individualized system setup function; you can configure the system according to your own hobby and demand. 3.1 OSD Via OSD menu, you can set the user interface display mode according to your own demand 1) All options are listed on the left of the OSD menu. 1. OSD: Select different theme style of OSD looking. 2. Time: Select whether to display system time. 3. OSD Timeout: Select information hint dialogue box and displays showing time period. 4.
5. 6. 7. 3.3 Contrast If the Contrast is not proper during watching, you can adjust the current contrast to be a proper one. HUE If the HUE is not proper during watching, you can adjust the current HUE to be a proper one. Saturation Adjust system saturation. System Setup System Setup menu provide different useful functions for your to use. 1. 2. 3. 4. 5. 6. 3.
3.5 Wakeup Timer If you want to set channel playing at certain time or giving some hint information such as Birthday. You can set via Wakeup Timer menu. 1. 3.6 Timer Number: To select the number of each timer, there are total 8 event timer available. 2. Timer Mode: To set the timer in different mode, such as OFF; Once; Daily; Weekly; Yearly. 3. Wakeup Mode: To set Wakeup Mode option as: OFF; Message; Channel and ON. 4. Wakeup Message: To set Wakeup message as: Birthday, Anniversary, General.
4. Software Upgrade This STB provide you an easy way for updating the STB software through USB stick. Contact your dealer if there is new software for your STB available, then you can update it easily with your USB stick through the USB input of this STB. 1. Copy the bin code file (such as p1.bin) from PC to your USB device, such as USB stick. 2. Power on the STB, plug in the USB disk properly. 3. Enter the main menu and select the Software Upgrade item. 4.
5. Factory Default The factory default enable you re-set your STB as factory settings mode. WARNING: You will loss all the settings and channels which you have already tuned. 6. Version The version information provides you current hardware and software information of your STB. USB MEDIA PLAY This STB integrates powerful function to support USB features and you can connect USB equipments via the USB input to play movies, MP3, and viewing pictures, At present, system can support usual USB media players.
2. Music 1. In main menu, press UP/DOWN to choose Music option, to choose ENTER key to confirm Press ENTER key to enter next directory, every directory can show music file and folder name only: Press PLAY button to start to play the mp3 music. 2. 3. 3. Photo 1. 2. 3 4 5 In main menu, press UP/DOWN to choose Photo option, press ENTER key to confirm.
Troubleshooting When you found some problems about this STB, please check the table in below. Because these may not be any serious problems: Fault Phenomenon Probably reasons Resolve Power on, but no display on screen Please carefully check the power plug, to see it is in socket of wall or not? Is power interrupted? Is the aerial install correct? Put firmly the power plug to the socket on the wall.
Specification 1. 2. 3. 4. 5.
hotline@probox.tv Thank you for choosing one of our products. This product complies with the legal standards and is manufactured under constant quality control. The technical specifications are up-to-date at the time of printing. Subject to changes without prior notice. V1.
