SDS

Titebond Gutter and Seam Sealant Gray
Section 8. Exposure controls/personal protection
Hand protection
Based on the hazard and potential for exposure, select a respirator that meets the
appropriate standard or certification. Respirators must be used according to a
respiratory protection program to ensure proper fitting, training, and other important
aspects of use.
Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary. Considering the parameters specified by the glove manufacturer, check
during use that the gloves are still retaining their protective properties. It should be
noted that the time to breakthrough for any glove material may be different for different
glove manufacturers. In the case of mixtures, consisting of several substances, the
protection time of the gloves cannot be accurately estimated.
Respiratory protection
:
:
Body protection
Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before
handling this product.
:
Other skin protection
:
Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
Section 9. Physical and chemical properties
Physical state
Melting point
Relative density
Solubility
Liquid. [Paste.]
Not available.
1.415
Insoluble in the following materials: cold water and hot water.
Characteristic.
Odor
pH
Gray.
Color
Evaporation rate
Flash point
Closed cup: >200°C (>392°F) [Setaflash.]
Not applicable.
Not available.
Odor threshold
:
:
:
:
:
:
:
:
:
:
Appearance
Boiling point
:
>200°C (>392°F)
VOC (less water, less
exempt solvents)
:
0 g/l
<1 (butyl acetate = 1)
0% (w/w)
:
Volatility
Section 10. Stability and reactivity
Hazardous decomposition
products
Conditions to avoid
No specific data.
Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
The product is stable.
Chemical stability
No specific data.
:
:
:
Incompatible materials
:
Possibility of hazardous
reactions
:
Under normal conditions of storage and use, hazardous reactions will not occur.
Reactivity
:
No specific test data related to reactivity available for this product or its ingredients.
Date of issue/Date of revision
:
4/24/2018
Version
:
1
5/10