Use and Care Guide

ManualsBrandsTitebond ManualsFlooring Tape1108000100

WOOD FLOORING TAPE

Ideal For All Types Of Flooring And Vertical Applications

• Acrylic Pressure Sensitive Adhesive

Technology Designed to Form a Strong,

Permanent Bond

• Performs Well in a Variety of Temperatures

and Conditions

• Two Inch Width is Ideal for Most

Board Sizes

Based on proprietary adhesive technology, Titebond

Tape provides a strong, permanent bond to nearly

any material, including concrete, primed lightweight concrete and plywood. Titebond Tape should be used

in conjunction with wood flooring starter rows, finish rows under toe kicks, baseboards, paneling, base shoes,

board replacements, transition strips, vertical flooring and all trim pieces. It is also compatible with Titebond

531 Moisture Control Systems.

The double-sided foam tape is easy-to-use and saves time with engineered wood and solid wood flooring

installations. It greatly reduces time nailing and filling holes. The initial bond strength is aggressive and

gains additional strength over time and with exposure to moisture and humidity (from the subfloor, the

wood flooring and the air). Titebond Tape is available in two inch-size rolls of 40 feet – the perfect amount

for a typical room.

FEATURES AND BENEFITS

•Easy to use, double-sided foam tape

for excellent line-to-line fit

• Designed for starter rows, toe kicks,

baseboards, paneling, board replacements

and transition strips

• Works well on trims, bullnoses, reducers,

t-moldings, and baby thresholds

• Builds aggressive strength even when

exposed to moisture and humidity

• Excellent heat and solvent resistance

• Bond strength is dependent on the amount

of adhesive-to-surface contact developed

ORDERING INFORMATION

• 1 Roll / 12 Units Per Package

2 Inches Wide / 40 Feet Long

8.28 lbs. / 45 Cartons Per Pallet

Product Code: 16320

FULL STRENGTH IN

BUILDS

72 HOURS

INITIAL

STRONG

TACK

INSTALLATION

REDUCES

TIME

Summary of content (2 pages)

PAGE 1
WOOD FLOORING TAPE Ideal For All Types Of Flooring And Vertical Applications • Acrylic Pressure Sensitive Adhesive Technology Designed to Form a Strong, Permanent Bond • Performs Well in a Variety of Temperatures and Conditions • Two Inch Width is Ideal for Most Board Sizes FEATURES AND BENEFITS •Easy to use, double-sided foam tape for excellent line-to-line fit • Designed for starter rows, toe kicks, baseboards, paneling, board replacements and transition strips • Works well on trims, bullnoses, reduc
PAGE 2
INSTRUCTIONS FOR USE STARTER ROWS Subfloor must be flat, dry and structurally sound. Titebond Tape can be used on both concrete and wood subfloors. On the starting wall, measure six inches in from the corners of the room. This will assure that the measurement is from the straightest part of the wall. Measure out from the wall the width of board, tongue and proper expansion space (width measurement is not needed if installing flooring with tongue toward installer). Next, snap chalk from point to point.