Specification

LEED Specification Sheet for New Construction
and Major Renovation
7/2/2021
To Whom It May Concern:
This letter has been written to verify the VOC content of Titebond III Ultimate Wood Glue. The current
VOC content of this product is 0.01 g/L. This is less than the current VOC content limits of California’s
South Coast Air Quality Management District (SCAQMD) Rule #1168 for Wood Substrate Adhesives
which has a VOC content limit of 30 g/L.
Additionally, Titebond III Ultimate Wood Glue has passed California Department of Public Health
CDPH/EHLB/Standard Method Version 1.1, 2010 testing (Emission testing method for CA
Specification 01350). This is a requirement for obtaining LEED v4 low emitting materials credit.
Note that this product does not contain any urea formaldehyde.
These statements are based on the Titebond product referenced above and the formulation of the
product and the requirements in place according to the date of this letter. Please use this letter for
specification purposes and call 1-888-533-9043 with any further questions.
For a copy of the SDS or TDS please visit www.Titebond.com.
Sincerely,
Ben Ward
Product Safety and Compliance Specialist
Franklin International