DENTITION III ULTIMATE WOOD GLUE Dentition Ill Ultimate Wood Glue is the first one-part, water cleanup wood glue ever offered that is proven waterproof. The waterproof formula passes the EXPANSIVE Type | water resistance specification and offers superior bond strength, longer open assembly time and lower application temperature. Dentition Ill is non-toxic, solvent free and cleans up with water safer to use than traditional waterproof wood glues.
SPECIFICATIONS CONFORMS TO MAST D-4236 Application Guidelines Application Temperature: Above 47°F Open Assembly Time: 8-10 minutes Total Assembly Time: 20-25 minutes Minimum Required Spread : Approximately 6 mils or 250 square feet per gallon Required Clamping Pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods) Method of Application: Plastic bottles for fine applications; glue may also be spread with a roller sp
Flash point: > 200°F Solids: 52% Freeze / Thaw Stability: Stable Viscosity: 4,200 cps pH:25 Chalk Temperature: To assure a good bond, 45°F is the lowest recommended temperature of the glue, air and materials during application. Storage Life: 24 months in tightly closed containers below 75°F Limitations Dentition Ill Ultimate Wood Glue is not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Use when temperature, glue and materials are above 45°F.
Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore.