Safety Data Sheet Titebond PROvantage Landscape Adhesive Section 1. Identification GHS product identifier : Titebond PROvantage Landscape Adhesive Product type : Liquid. Address Contact person : Franklin International 2020 Bruck Street Columbus OH 43207 : Franklin Technical Services Telephone : (800) 877-4583 In case of emergency Product code : Franklin Security (614) 445-1300 : 3121 Date of revision : 10/27/2015. Print date : 10/27/2015.
Titebond PROvantage Landscape Adhesive Section 2. Hazards identification Prevention Response Storage Disposal Supplemental label elements Hazards not otherwise classified : Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protective equipment as required. Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Titebond PROvantage Landscape Adhesive Section 4. First aid measures Description of necessary first aid measures Eye contact Inhalation Skin contact Ingestion : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention. If necessary, call a poison center or physician. : Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Titebond PROvantage Landscape Adhesive Section 4. First aid measures Indication of immediate medical attention and special treatment needed, if necessary Notes to physician Specific treatments Protection of first-aiders : Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled. : No specific treatment. : No action shall be taken involving any personal risk or without suitable training.
Titebond PROvantage Landscape Adhesive Section 6. Accidental release measures Large spill : Stop leak if without risk. Move containers from spill area. Use spark-proof tools and explosion-proof equipment. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g.
Titebond PROvantage Landscape Adhesive Section 8. Exposure controls/personal protection TWA: 610 mg/m³ 8 hours. ACGIH TLV (United States, 3/2015). TWA: 10 ppm 8 hours. TWA: 35 mg/m³ 8 hours. STEL: 15 ppm 15 minutes. STEL: 53 mg/m³ 15 minutes. OSHA PEL 1989 (United States, 3/1989). TWA: 10 ppm 8 hours. TWA: 30 mg/m³ 8 hours. STEL: 20 ppm 15 minutes. STEL: 60 mg/m³ 15 minutes. NIOSH REL (United States, 10/2013). CEIL: 4 ppm 15 minutes. CEIL: 15 mg/m³ 15 minutes.
Titebond PROvantage Landscape Adhesive Section 8. Exposure controls/personal protection Eye/face protection : Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection: chemical splash goggles.
Titebond PROvantage Landscape Adhesive Section 10. Stability and reactivity Incompatible materials Hazardous decomposition products : Reactive or incompatible with the following materials: oxidizing materials : Under normal conditions of storage and use, hazardous decomposition products should not be produced. Section 11.
Titebond PROvantage Landscape Adhesive Section 11.
Titebond PROvantage Landscape Adhesive Section 12. Ecological information Product/ingredient name LogPow BCF Potential methyl acetate vinyl acetate 6,6'-di-tert-butyl-2,2'methylenedi-p-cresol 0.18 0.73 6.25 3.16 549.54 low low high Other adverse effects : No known significant effects or critical hazards. Section 13. Disposal considerations Disposal methods : The generation of waste should be avoided or minimized wherever possible.
Titebond PROvantage Landscape Adhesive Section 14. Transport information Special precautions for user : Transport within user’s premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code : Not available. Section 15. Regulatory information U.S.
Titebond PROvantage Landscape Adhesive Section 15. Regulatory information Massachusetts : The following components are listed: METHYL ACETATE New York : The following components are listed: Vinyl acetate New Jersey : The following components are listed: METHYL ACETATE; ACETIC ACID, METHYL ESTER; VINYL ACETATE; ACETIC ACID ETHENYL ESTER : The following components are listed: ACETIC ACID, METHYL ESTER; ACETIC ACID ETHENYL ESTER Pennsylvania California Prop. 65 Not available.
Titebond PROvantage Landscape Adhesive Section 16. Other information Hazardous Material Information System (U.S.A.) Health 2 Flammability 3 Physical hazards 0 Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks Although HMIS® ratings are not required on SDSs under 29 CFR 1910. 1200, the preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS® program.
Titebond PROvantage Landscape Adhesive Section 16. Other information To the best of our knowledge, the information contained herein is accurate. However, neither the above-named supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution.