Product Brochure

Sales: 1.800.669.4583 / Technical: 1.800.347.4583
SPECIFICATIONS
Complies with the following requirements:
• ASTM C920, Grade NS, Class 25
• ASTM C834 Type OP Grade -18°C
• Federal Specification TT-S-00230C Type II Class A
PHYSICAL AND CHEMICAL
CHARACTERISTICS
Type: Acrylic
Non-reactive VOC:
25 g/L (< 1.5% wt.)
Tooling time: 15-20 minutes
Full cure: 3-7 days
*
Weight per gallon: 13.5 lbs.
Freeze thaw stability: Stable
Flashpoint: Solvent free/Not applicable
Application temperature: 40°F – 120°F
Joint movement capability:
±
25%
Storage life: 24 months in tightly closed containers
at 50°F to 80°F
Coverage: 10.1 fl. oz. = 31 linear ft. at a 1/4” bead
Clean-up: Soap and water
* Cure will be affected by joint size, configuration and environmental conditions.
Limited Warranty: If not satisfied with product performance when used as directed,
return container and proof of purchase to Franklin International, Inc. for replacement
of product. Liability is limited to product replacement only.
APPLICATION
Titebond® Radon Sealant comes ready to use. Apply by
professional cartridge gun. Extrude sealant into openings, gaps or
holes surrounding the application. Fill joint opening to maximum
capacity and repeat as necessary. If joint depth exceeds 1/2”, use
backing material. If necessary, smooth bead immediately with
a damp sponge. Painting may occur 2-4 hours after application
with a premium grade water-based (latex-based) paint. For other
paint types, a compatibility test is recommended. It is the sole
responsibility of the user to thoroughly test any proposed use
with all substrates to determine project suitability.
LIMITATIONS
Do not apply if rain is expected within 12 hours. Air, sealant and
surface temperature should be above 40°F. Sealant should be dry
to the touch and ready to paint in 2-4 hours. It is not designed for
continuous submersion or use below the waterline. According
to the EPA, sealants can help limit the entry of radon through
the foundation. It is also recommended that a professionally
installed radon mitigation or fan based system be used in
conjunction with this sealant. For questions, please call our
Help Line at 1.800.347.4583 or visit us at Titebond.com.
CAUTION STATEMENT
WARNING: EYE, SKIN AND RESPIRATORY IRRITANT. Contains
acrylic polymer, limestone, titanium dioxide and ethylene glycol.
May cause eye irritation. Long term exposure to ingredients in
this product can increase the risk of certain cancers. Adverse
reproductive effects have been reported in animals. Avoid contact
with eyes, skin and clothing. Use only with adequate ventilation.
Wear appropriate personal protective equipment. FIRST AID: If
swallowed, do not induce vomiting; contact physician. If eye contact
occurs, flush eyes with water for 15 minutes; contact physician. Wash
skin contact areas with soap and water; contact physician if irritation
persists. For additional information, refer to Safety Data Sheet.
KEEP OUT OF THE REACH OF CHILDREN.
WARNING: This product contains a chemical known to the
State of California to cause cancer and birth defects or other
reproductive harm.
Paintable: 2-4 hours
Tack-free time: 2-3 hours
Solids: 82%
©2016 BCM 5/16 FF1024
TITEBOND.COM
Units Per Pallet
108
Units Per Package
12
UPC
037083032512
Weight
15.0 lbs.
Size/Color
10.1 oz. Cartridge
Part Number
3251