SDS

Titebond SB All Purpose Construction Adhesive
Section 2. Hazards identification
Signal word
:
Danger
Hazard statements
:
Highly flammable liquid and vapor.
Causes skin irritation.
May cause respiratory irritation.
May cause drowsiness or dizziness.
Suspected of damaging fertility or the unborn child. (inhalation)
Causes damage to organs through prolonged or repeated exposure. (central nervous
system (CNS), kidneys, liver) (inhalation)
Precautionary statements
Prevention
:
Obtain special instructions before use. Do not handle until all safety precautions have
been read and understood. Wear protective gloves, protective clothing and eye or face
protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition
sources. No smoking. Use explosion-proof electrical, ventilating or lighting equipment.
Use non-sparking tools. Take action to prevent static discharges. Use only outdoors or
in a well-ventilated area. Do not breathe vapor. Do not eat, drink or smoke when using
this product. Wash thoroughly after handling.
Response
:
IF exposed or concerned: Get medical advice or attention. IF INHALED: Remove
person to fresh air and keep comfortable for breathing. Call a POISON CENTER or
doctor if you feel unwell. IF ON SKIN (or hair): Take off immediately all contaminated
clothing. Rinse skin with water. IF ON SKIN: Wash with plenty of water. If skin irritation
occurs: Get medical advice or attention.
Storage
:
Store locked up. Store in a well-ventilated place. Keep container tightly closed. Keep
cool.
Disposal
:
Dispose of contents and container in accordance with all local, regional, national and
international regulations.
Supplemental label
elements
:
Avoid contact with skin and clothing. Wash thoroughly after handling.
Hazards not otherwise
classified
:
Prolonged or repeated contact may dry skin and cause irritation.
Section 3. Composition/information on ingredients
Ingredient name
CAS number
%
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified and hence require reporting in this section.
Other means of
identification
:
Not available.
Substance/mixture
:
Occupational exposure limits, if available, are listed in Section 8.
Mixture
Any concentration shown as a range is to protect confidentiality or is due to batch variation.
n-hexane
≥25 - ≤50
110-54-3
Isopropyl alcohol
≤3
67-63-0
Section 4. First aid measures
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10
minutes. Get medical attention.
Eye contact
:
Description of necessary first aid measures
Date of issue/Date of revision
:
10/17/2022
Version
:
1
2/14