SDS

Titebond SB All Purpose Construction Adhesive
Section 9. Physical and chemical properties
Physical state
Melting point/freezing point
Liquid. [Paste.]
Not available.
Alcohol-like.
Odor
pH
Beige.
Color
Flash point
Closed cup: -17.7°C (0.14°F) [Setaflash]
Not applicable.
Not available.
Odor threshold
:
:
:
:
:
:
:
Appearance
Boiling point, initial boiling
point, and boiling range
:
61.667°C (143°F)
The conditions of measurement of all properties are at standard temperature and pressure unless otherwise indicated.
Vapor pressure
Relative density
Relative vapor density
Solubility(ies)
1.19
Not available.
Evaporation rate
Not available.
Auto-ignition temperature
252°C (485.6°F)
Not applicable.
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
Flammability
:
Highly flammable in the presence of the following materials or conditions: open
flames, sparks and static discharge.
Lower and upper explosion
limit/flammability limit
:
Lower: 1.2%
Upper: 7.5%
Ingredient name
Vapor Pressure at 20˚C
Vapor pressure at 50˚C
mm Hg
kPa
Method
mm Hg
kPa
Method
n-hexane
127.51
17
Media
Result
cold water
Not soluble
hot water
Not soluble
Viscosity
Not available.
:
Decomposition temperature
:
Not available.
VOC (less water, less
exempt solvents)
:
318 g/l
25.9% (w/w)
:
Volatility
Section 10. Stability and reactivity
Conditions to avoid
Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld,
braze, solder, drill, grind or expose containers to heat or sources of ignition.
The product is stable.
Chemical stability
Reactive or incompatible with the following materials:
oxidizing materials
:
:
Incompatible materials
:
Possibility of hazardous
reactions
:
Under normal conditions of storage and use, hazardous reactions will not occur.
Reactivity
:
No specific test data related to reactivity available for this product or its ingredients.
Date of issue/Date of revision
:
10/17/2022
Version
:
1
7/14