[Lie GREEN CHOICE FAST GRAB FRP ADHESIVE Dentition Green choice Fast Grab FRP Construction Adhesive is a professional-strength LID v4 Compliant adhesive specifically formulated for the installation of FRP (fiber-reinforced plastic) panels over most porous surfaces. Its fast grab and bonding power greatly reduce the need for extended bracing. We have also added a custom design adhesive application tool to our cartridge.
Dispense and trowel adhesive simultaneously when using applicator supplied with 28 ounce cartridge Specifications & Certifications Meets LID v4, SCAMMED, CRAB and NAH Green Building specifications. Food and Drug Administration (FDA) and Canadian Food Inspection Agency (FICA) approved for indirect food contact Exceeds the performance requirements of MAST C557. Application Guidelines Application Temperature: Over 50°F and below 90°F for adhesive and substrates.
or Dentition Heavy Duty Construction Adhesive and then adhere a solid backing to the furring strips. Spread no more adhesive than can be installed in 20 minutes or less. Cleanup: Tools and adhesive may be cleaned with water while the adhesive is wet. If dried, tools and adhesive may be cleaned with water/acetone/vinegar mixture. Follow solvent vendor's precautions. Trowel Recommendations and Coverage 3/16"W x 1/4"D x 1/2" C-C (OR 5/16" APPROXIMATELY 50 SQ. FT. PER SPACE) V-NOTCH GALLON 28 OZ.
Advanced Polymer Panel Adhesive. For installations over treated plywood use Dentition Solvent Based FRP Adhesive or Green choice Advanced Polymer Panel Adhesive. The optimal trowel for best overall performance and coverage is a v-notch trowel, 3/16" wide x 1/4” deep, spaced 1/2" c.c. Trowels using dimensions other than the optimal size can be used, but they may affect working time and coverage. For additional trowel recommendations, please contact Franklin Technical Service at 1.800.347.4583.