Safety Data Sheet TB Fast Set Construction Adhesive Section 1. Identification GHS product identifier : TB Fast Set Construction Adhesive Product type : Liquid. CAS # : mixture Address Contact person : Franklin International 2020 Bruck Street Columbus OH 43207 : Franklin Technical Services Telephone : (800) 877-4583 In case of emergency Reference number : Franklin Security (614) 445-1300 : 3217 Product code : 4222 Date of revision : 6/18/2015. Print date : 6/18/2015.
TB Fast Set Construction Adhesive Section 2. Hazards identification Precautionary statements General Prevention Response Storage Disposal Hazards not otherwise classified : Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand. : Wear protective gloves. In case of inadequate ventilation wear respiratory protection. Use only outdoors or in a well-ventilated area. Do not breathe vapor.
TB Fast Set Construction Adhesive Section 4. First aid measures Description of necessary first aid measures Eye contact Inhalation Skin contact Ingestion : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention following exposure or if feeling unwell. : Remove victim to fresh air and keep at rest in a position comfortable for breathing.
TB Fast Set Construction Adhesive Section 4. First aid measures Specific treatments : No specific treatment. Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. If it is suspected that fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.
TB Fast Set Construction Adhesive Section 7. Handling and storage Precautions for safe handling Protective measures : Put on appropriate personal protective equipment (see Section 8). Persons with a history of skin sensitization problems or asthma, allergies or chronic or recurrent respiratory disease should not be employed in any process in which this product is used. Do not get in eyes or on skin or clothing. Do not breathe vapor or mist. Do not ingest. Use only with adequate ventilation.
TB Fast Set Construction Adhesive Section 8. Exposure controls/personal protection light [1]Absorbed through skin. [3]Skin sensitization Notes: [A]as total hydrocarbon vapour Mexico Occupational exposure limits Ingredient Exposure limits 4,4'-methylenediphenyl diisocyanate NOM-010-STPS (Mexico, 9/2000). LMPE-PPT: 0.005 ppm 8 hours. LMPE-PPT: 0.051 mg/m³ 8 hours. ACGIH TLV (United States, 4/2014). Absorbed through skin. TWA: 200 mg/m³, (as total hydrocarbon vapor) 8 hours.
TB Fast Set Construction Adhesive Section 9. Physical and chemical properties Appearance Physical state : Liquid. [Paste.] Color : Brown. Odor Odor threshold pH : Faint odor. : Not available. Melting point : Not applicable. : Not available. Boiling point : >100°C (>212°F) Flash point : Closed cup: >100°C (>212°F) [Setaflash.] Evaporation rate : <1 (butyl acetate = 1) VOC (less water, less exempt solvents) : 20 g/l Relative density : 1.
TB Fast Set Construction Adhesive Section 11. Toxicological information Respiratory : Contains isocyanates. May cause sensitization by inhalation. Once sensitized, a severe allergic reaction may occur when subsequently exposed to very low levels. Specific target organ toxicity (single exposure) Name Category Route of exposure Target organs methylenediphenyl diisocyanate Category 3 Not applicable. 4,4’-methylenediphenyl diisocyanate Category 3 Not applicable.
TB Fast Set Construction Adhesive Section 11. Toxicological information Conclusion/Summary Carcinogenicity : Contains isocyanates. May cause allergic reactions in certain individuals. Once sensitized, a severe allergic reaction may occur when subsequently exposed to very low levels. Once sensitized, a severe allergic reaction may occur when subsequently exposed to very low levels. : May cause damage to organs through prolonged or repeated exposure if inhaled.
TB Fast Set Construction Adhesive Section 14. Transport information DOT Classification TDG Classification Mexico Classification ADR/RID IMDG IATA UN number Not regulated. Not regulated. Not regulated. Not regulated. Not regulated. Not regulated. UN proper shipping name - - - - - - Transport hazard class(es) - - - - - Packing group - - - - - - Environmental hazards No. No. No. No. No. No.
TB Fast Set Construction Adhesive Section 15. Regulatory information Name % Fire Sudden hazard release of pressure Reactive Immediate (acute) health hazard Delayed (chronic) health hazard methylenediphenyl diisocyanate 4,4’-methylenediphenyl diisocyanate Distillates (petroleum), hydrotreated light 1-5 1-5 1-5 No. No. Yes. No. No. No. Yes. Yes. No. Yes. Yes. No. No. No. No.
TB Fast Set Construction Adhesive Section 15. Regulatory information International lists : Australia inventory (AICS): Not determined. China inventory (IECSC): All components are listed or exempted. Japan inventory: Not determined. Korea inventory: Not determined. Malaysia Inventory (EHS Register): Not determined. New Zealand Inventory of Chemicals (NZIoC): Not determined. Philippines inventory (PICCS): All components are listed or exempted. Taiwan inventory (CSNN): All components are listed or exempted.
TB Fast Set Construction Adhesive Section 16. Other information Date of previous issue : 6/2/2015.
