SDS
TB Fast Set Construction Adhesive
Section 7. Handling and storage
Advice on general
occupational hygiene
Conditions for safe storage,
including any
incompatibilities
Eating, drinking and smoking should be prohibited in areas where this material is
handled, stored and processed. Workers should wash hands and face before eating,
drinking and smoking. Remove contaminated clothing and protective equipment before
entering eating areas. See also Section 8 for additional information on hygiene
measures.
Store between the following temperatures: -4.5061 to 40.556°C (23.9 to 105°F). Store
in accordance with local regulations. Store in original container protected from direct
sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see
Section 10) and food and drink. Store locked up. Keep container tightly closed and
sealed until ready for use. Containers that have been opened must be carefully
resealed and kept upright to prevent leakage. Do not store in unlabeled containers.
Use appropriate containment to avoid environmental contamination.
:
:
Protective measures
Put on appropriate personal protective equipment (see Section 8). Persons with a
history of skin sensitization problems or asthma, allergies or chronic or recurrent
respiratory disease should not be employed in any process in which this product is used.
Do not get in eyes or on skin or clothing. Do not breathe vapor or mist. Do not ingest.
Use only with adequate ventilation. Wear appropriate respirator when ventilation is
inadequate. Keep in the original container or an approved alternative made from a
compatible material, kept tightly closed when not in use. Empty containers retain
product residue and can be hazardous. Do not reuse container.
:
Precautions for safe handling
4,4’-methylenediphenyl diisocyanate
ACGIH TLV (United States, 4/2014).
TWA: 0.005 ppm 8 hours.
OSHA PEL 1989 (United States, 3/1989).
CEIL: 0.02 ppm
CEIL: 0.2 mg/m³
NIOSH REL (United States, 10/2013).
TWA: 0.05 mg/m³ 10 hours.
TWA: 0.005 ppm 10 hours.
CEIL: 0.2 mg/m³ 10 minutes.
CEIL: 0.02 ppm 10 minutes.
OSHA PEL (United States, 2/2013).
CEIL: 0.02 ppm
CEIL: 0.2 mg/m³
Distillates (petroleum), hydrotreated light
ACGIH TLV (United States, 4/2014). Absorbed through skin.
TWA: 200 mg/m³, (as total hydrocarbon vapor) 8 hours.
Section 8. Exposure controls/personal protection
Ingredient name
Exposure limits
Control parameters
Occupational exposure limits
Canada
Occupational exposure limits
Ingredient
List name
ppm
mg/
m³
Other
ppm
mg/
m³
Other
ppm
mg/
m³
Other
Notations
methylenediphenyl diisocyanate
BC 4/2014
0.005
-
-
-
-
-
0.01
-
-
ON 1/2013
0.005
-
-
-
-
-
0.02
-
-
4,4'-methylenediphenyl diisocyanate
US ACGIH 4/2014
0.005
-
-
-
-
-
-
-
-
AB 4/2009
0.005
0.05
-
-
-
-
-
-
-
BC 4/2014
0.005
-
-
-
-
-
0.01
-
-
[1][3]
ON 1/2013
0.005
-
-
-
-
-
-
-
-
QC 1/2014
0.005
0.051
-
-
-
-
-
-
-
[3]
Distillates (petroleum), hydrotreated
light, as total hydrocarbon vapor
US ACGIH 4/2014
-
200
-
-
-
-
-
-
-
[1]
Distillates (petroleum), hydrotreated
light, as total hydrocarbon vapour
AB 4/2009
-
200
-
-
-
-
-
-
-
[1]
BC 4/2014
-
200
-
-
-
-
-
-
-
[1] [A]
Distillates (petroleum), hydrotreated
ON 1/2013
-
200
-
-
-
-
-
-
-
[1]
TWA (8 hours)
STEL (15 mins)
Ceiling
United States
Date of issue/Date of revision
:
6/18/2015.
Version
:
4
5/13