SDS

TB Fast Set Construction Adhesive
Section 9. Physical and chemical properties
Physical state
Melting point
Relative density
Solubility
Liquid. [Paste.]
Not available.
1.32
Insoluble in the following materials: cold water and hot water.
Faint odor.
Odor
pH
Brown.
Color
Evaporation rate
Flash point
Closed cup: >100°C (>212°F) [Setaflash.]
Not applicable.
Not available.
Odor threshold
:
:
:
:
:
:
:
:
:
:
Appearance
Boiling point
:
>100°C (>212°F)
VOC (less water, less
exempt solvents)
:
20 g/l
<1 (butyl acetate = 1)
Section 10. Stability and reactivity
Hazardous decomposition
products
Conditions to avoid
No specific data.
Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
The product is stable.
Chemical stability
No specific data.
:
:
:
Incompatible materials
:
Possibility of hazardous
reactions
:
Under normal conditions of storage and use, hazardous reactions will not occur.
Reactivity
:
No specific test data related to reactivity available for this product or its ingredients.
Section 11. Toxicological information
Acute toxicity
Product/ingredient name
Result
Species
Dose
Exposure
Conclusion/Summary
:
Not available.
Irritation/Corrosion
Product/ingredient name
Result
Score
Exposure
Observation
Conclusion/Summary
Skin
:
May cause skin irritation. Contains isocyanates. May be harmful if absorbed through
skin.
Eyes
:
This product may irritate eyes upon contact.
Respiratory
:
May cause respiratory irritation.
Sensitization
Conclusion/Summary
Skin
:
Contains isocyanates. May cause sensitization by skin contact. Once sensitized, a
severe allergic reaction may occur when subsequently exposed to very low levels.
Species
Information on toxicological effects
4,4'-methylenediphenyl
diisocyanate
LD50 Oral
Rat
9200 mg/kg
-
4,4'-methylenediphenyl
diisocyanate
Eyes - Moderate irritant
Rabbit
-
100
milligrams
-
Date of issue/Date of revision
:
6/18/2015.
Version
:
4
7/13