SDS

GREENchoice Advanced Polymer Panel Adhesive
No action shall be taken involving any personal risk or without suitable training.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilled material. Do not breathe vapor or mist.
Provide adequate ventilation. Wear appropriate respirator when ventilation is
inadequate. Put on appropriate personal protective equipment (see Section 8).
Stop leak if without risk. Move containers from spill area. Approach release from
upwind. Prevent entry into sewers, water courses, basements or confined areas.
Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth,
vermiculite or diatomaceous earth and place in container for disposal according to local
regulations (see section 13). Dispose of via a licensed waste disposal contractor.
Contaminated absorbent material may pose the same hazard as the spilled product.
Note: see section 1 for emergency contact information and section 13 for waste
disposal.
Environmental precautions
6. Accidental release measures
:
Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).
Personal precautions
:
Large spill
:
Stop leak if without risk. Move containers from spill area. Dispose of via a licensed
waste disposal contractor. Absorb with an inert material.
Small spill
:
Store between the following temperatures: 10 to 32.222°C (50 to 90°F). Store in
accordance with local regulations. Store in original container protected from direct
sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see
section 10) and food and drink. Keep container tightly closed and sealed until ready for
use. Containers that have been opened must be carefully resealed and kept upright to
prevent leakage. Do not store in unlabeled containers. Use appropriate containment to
avoid environmental contamination. Contains moisture-sensitive material. Store in a dry
place.
Put on appropriate personal protective equipment (see Section 8). Eating, drinking and
smoking should be prohibited in areas where this material is handled, stored and
processed. Workers should wash hands and face before eating, drinking and smoking.
Do not get in eyes or on skin or clothing. Do not breathe vapor or mist. Do not ingest.
Keep in the original container or an approved alternative made from a compatible
material, kept tightly closed when not in use. Empty containers retain product residue
and can be hazardous. Do not reuse container.
7. Handling and storage
Handling
Storage
:
:
methanol
ACGIH TLV (United States, 1/2011). Absorbed through skin.
TWA: 200 ppm 8 hour(s).
TWA: 262 mg/m³ 8 hour(s).
STEL: 250 ppm 15 minute(s).
STEL: 328 mg/m³ 15 minute(s).
OSHA PEL 1989 (United States, 3/1989). Absorbed through skin.
TWA: 200 ppm 8 hour(s).
TWA: 260 mg/m³ 8 hour(s).
STEL: 250 ppm 15 minute(s).
STEL: 325 mg/m³ 15 minute(s).
NIOSH REL (United States, 6/2009). Absorbed through skin.
TWA: 200 ppm 10 hour(s).
TWA: 260 mg/m³ 10 hour(s).
STEL: 250 ppm 15 minute(s).
STEL: 325 mg/m³ 15 minute(s).
OSHA PEL (United States, 6/2010).
TWA: 200 ppm 8 hour(s).
TWA: 260 mg/m³ 8 hour(s).
8. Exposure controls/personal protection
United States
Ingredient
Exposure limits
3/11
4319
5/24/2012.