SDS

GREENchoice Advanced Polymer Panel Adhesive
8. Exposure controls/personal protection
Use a properly fitted, air-purifying or air-fed respirator complying with an approved
standard if a risk assessment indicates this is necessary. Respirator selection must be
based on known or anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator.
Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists or
dusts.
Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before handling
this product.
Personal protection
Eyes
Skin
Respiratory
Consult local authorities for acceptable exposure limits.
:
:
:
Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary.
Hands
:
methanol
NOM-010-STPS (Mexico, 9/2000). Absorbed through skin.
LMPE-PPT: 200 ppm 8 hour(s).
LMPE-PPT: 260 mg/m³ 8 hour(s).
LMPE-CT: 310 mg/m³ 15 minute(s).
LMPE-CT: 250 ppm 15 minute(s).
Canada
Mexico
Engineering measures
:
No special ventilation requirements. Good general ventilation should be sufficient to
control worker exposure to airborne contaminants. If this product contains ingredients
with exposure limits, use process enclosures, local exhaust ventilation or other
engineering controls to keep worker exposure below any recommended or statutory
limits.
Hygiene measures
:
Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period. Appropriate
techniques should be used to remove potentially contaminated clothing. Wash
contaminated clothing before reusing. Ensure that eyewash stations and safety showers
are close to the workstation location.
Recommended monitoring
procedures
:
If this product contains ingredients with exposure limits, personal, workplace atmosphere
or biological monitoring may be required to determine the effectiveness of the ventilation
or other control measures and/or the necessity to use respiratory protective equipment.
Environmental exposure
controls
:
Emissions from ventilation or work process equipment should be checked to ensure they
comply with the requirements of environmental protection legislation.
Ingredient
Exposure limits
Occupational exposure limits
Ingredient
List name
ppm
mg/m³
Other
ppm
mg/m³
Other
ppm
mg/m³
Other
Notations
methanol
US ACGIH 1/2011
200
262
-
250
328
-
-
-
-
[1]
AB 4/2009
200
262
-
250
328
-
-
-
-
[1]
BC 9/2011
200
-
-
250
-
-
-
-
-
[1]
ON 7/2010
200
262
-
250
328
-
-
-
-
[1]
QC 9/2011
200
262
-
250
328
-
-
-
-
[1]
TWA (8 hours)
STEL (15 mins)
Ceiling
[1]Absorbed through skin.
Occupational exposure limits
4/11
4319
5/24/2012.