MSDS

Titebond Weathermaster Black 003
No action shall be taken involving any personal risk or without suitable training.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilled material. Avoid breathing vapor or mist.
Provide adequate ventilation. Wear appropriate respirator when ventilation is
inadequate. Put on appropriate personal protective equipment (see section 8).
Stop leak if without risk. Move containers from spill area. Approach release from
upwind. Prevent entry into sewers, water courses, basements or confined areas.
Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth,
vermiculite or diatomaceous earth and place in container for disposal according to local
regulations (see section 13). Dispose of via a licensed waste disposal contractor.
Contaminated absorbent material may pose the same hazard as the spilled product.
Note: see section 1 for emergency contact information and section 13 for waste
disposal.
Environmental precautions
Accidental release measures
: Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).
Personal precautions :
Large spill :
6 .
Stop leak if without risk. Move containers from spill area. Dispose of via a licensed
waste disposal contractor. Absorb with an inert material.
Small spill :
Store in accordance with local regulations. Store in original container protected from
direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials
(see section 10) and food and drink. Keep container tightly closed and sealed until ready
for use. Containers that have been opened must be carefully resealed and kept upright
to prevent leakage. Do not store in unlabeled containers. Use appropriate containment
to avoid environmental contamination.
Put on appropriate personal protective equipment (see section 8). Eating, drinking and
smoking should be prohibited in areas where this material is handled, stored and
processed. Workers should wash hands and face before eating, drinking and smoking.
Do not ingest. Avoid contact with eyes, skin and clothing. Avoid breathing vapor or mist.
Keep in the original container or an approved alternative made from a compatible
material, kept tightly closed when not in use. Empty containers retain product residue
and can be hazardous. Do not reuse container.
Handling and storage
Handling
Storage
:
:
7 .
Exposure controls/personal protection
Consult local authorities for acceptable exposure limits.
Canada
8 .
Engineering measures : No special ventilation requirements. Good general ventilation should be sufficient to
control worker exposure to airborne contaminants. If this product contains ingredients
with exposure limits, use process enclosures, local exhaust ventilation or other
engineering controls to keep worker exposure below any recommended or statutory
limits.
Recommended monitoring
procedures
: If this product contains ingredients with exposure limits, personal, workplace atmosphere
or biological monitoring may be required to determine the effectiveness of the ventilation
or other control measures and/or the necessity to use respiratory protective equipment.
Occupational exposure limits
Ingredient List name ppm mg/m³ Other ppm mg/m³ Other ppm mg/m³ Other Notations
No exposure limit value known.
TWA (8 hours) STEL (15 mins) Ceiling
3/84403111/17/2010.