Product Brochure

ManualsBrandsTitebond ManualsCaulk & Sealants10.1 oz. WeatherMaster Bronze Sealant (12 Pack)

SPECIFICATIONS

Complies with the following requirements:

• ASTM C920, Type S, Grade NS, Class 50, Use NT, M, G and A

• Federal Specification TT-S-00230C Type II Class A

(white, colors and crystal clear)

• CAN/CGSB-19 13-M87 Classification MCG-2-25-A-N

(white, colors and crystal clear)

• USDA compliant

PHYSICAL AND CHEMICAL

CHARACTERISTICS

Type: Advanced polymer

Reactive VOC:

White & Colors 0 g/L, 24.05 g/L

(1.69%) during cure

Translucent 3 g/L (<0.3% wt.)

Clear 11g/L (<2% wt.)

Weight per gallon:

White & Colors 12.43 lbs.

Translucent 8.68 lbs.

Clear 8.76 lbs.

Tooling time: 10-15 minutes

Full cure: 24 hours for 1/4 inch bead

Freeze thaw stability: Stable /will not freeze

Flashpoint: Solvent free/Not applicable

Application temperature: 0°F - 140°F

Joint movement capability: ± 50%

Storage life: 24 months in tightly closed containers below 80°F

Coverage: 10.1 fl. oz. = 31 linear ft. at a 1/4” bead

Cleanup:

White & Colors Isopropyl alcohol or acetone

Translucent Mineral spirits or similar solvent

APPLICATION

Titebond® WeatherMaster™ Sealant comes ready to use. Apply by

professional cartridge gun. Air, sealant and surface temperature

should be above 0°F (-18°C). WeatherMaster is intended for exterior

use. If used indoors, sealant may need to be painted.

Extrude

sealant into openings, gaps or holes surrounding the application.

Fill joint opening to maximum capacity and repeat as necessary.

Always apply sealant in a bead form. To ensure neat sealant lines,

mask areas adjacent to joints. Once sealant is applied, do not smear,

feather or wipe with solvents. Once sealant is dry to the touch and

does not transfer, remove masking tape. Painting may occur one

hour after application with a water-based (latex-based) paint.

For

other paint types, a compatibility test is recommended. It is the sole

responsibility of the user to thoroughly test any proposed use with

all substrates to determine projects suitability.

Note: Highly recommend using backer rod/backing material

for all joints

LIMITATIONS

Not designed for continuous submersion or use below the waterline.

Store unused product in dry location at or below 80°F (27°C). Do not

apply WeatherMaster Translucent to polycarbonate due to solvent

cracking, for Clear and Colors check with polycarbonate supplier on

compatibility. WeatherMaster products release methanol during cure.

Application of sealant at high temperatures may cause the sealant

to sag in some applications. Not for use with nail holes or butt joints.

For questions, please call our Help Line 1.800.347.4583 or visit us at

Titebond.com.

CAUTION STATEMENT

CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow

eye contact or prolonged skin contact. First Aid: If swallowed, do not

induce vomiting; contact physician. If eye contact occurs, flush with

water for 15 minutes. Wash skin contact areas with soap and water.

If irritation from eye or skin contact areas persists, contact physician.

Product releases methanol during cure. For additional information,

refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

Titebond WeatherMaster Translucent (#44011) is NOT paintable.

‡

Titebond WeatherMaster Translucent (#44011) releases methyl ethyl ketoxime

(MEKO) during cure.

1081203708343991510.13 lbs.10.1 oz. Cartridge/Clear43991

1081203708344011910.13 lbs.10.1 oz. Cartridge/Translucent44011

Units Per Pallet

108

Units Per Package

UPC

037083440010

Weight

14.92 lbs.

Size/Color

10.1 oz. Cartridge/White

Over 175 colors available

Part Number

44001

VISIT WWW.TITEBOND.COM FOR THE

MOST UP-TO-DATE PRODUCT INFORMATION

Paintable: After 1 hour

Tack-free time:

White & Colors 30-60 min

Translucent 15-20 min

Clear 30-60 min

Shore A:

White & Colors 35-45

Translucent 15-25

Clear 25-35

Solids: 99%

Limited Warranty: If not satisfied with product performance when used as directed, return

container and proof of purchase to Franklin International, Inc. for replacement of product.

Buyer’s sole remedy shall be limited only to the replacement of product exclusive of cost of

labor. No other warranties are expressed or implied.