Safety Data Sheet Titebond Heavy Duty Construction Adhesive Section 1. Identification GHS product identifier : Titebond Heavy Duty Construction Adhesive Physical state : Liquid. Address Contact person : Franklin International 2020 Bruck Street Columbus OH 43207 : Franklin Technical Services Telephone : (800) 877-4583 In case of emergency : Franklin Security (614) 445-1300 : SDS@FranklinInternational.
Titebond Heavy Duty Construction Adhesive Section 2. Hazards identification Hazard pictograms : Signal word : Danger Hazard statements : Highly flammable liquid and vapor. Causes serious eye irritation. Causes skin irritation. Suspected of damaging fertility or the unborn child if inhaled. May cause respiratory irritation. May cause drowsiness or dizziness. Causes damage to organs through prolonged or repeated exposure if inhaled.
Titebond Heavy Duty Construction Adhesive Section 4. First aid measures Description of necessary first aid measures Eye contact : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention. Inhalation : Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Titebond Heavy Duty Construction Adhesive Section 4. First aid measures Indication of immediate medical attention and special treatment needed, if necessary Notes to physician Specific treatments : Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled. : No specific treatment. Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training.
Titebond Heavy Duty Construction Adhesive Section 6. Accidental release measures Large spill : Stop leak if without risk. Move containers from spill area. Use spark-proof tools and explosion-proof equipment. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g.
Titebond Heavy Duty Construction Adhesive Section 8. Exposure controls/personal protection TWA: 250 ppm 8 hours. STEL: 500 ppm 15 minutes. OSHA PEL 1989 (United States, 3/1989). TWA: 750 ppm 8 hours. TWA: 1800 mg/m³ 8 hours. STEL: 1000 ppm 15 minutes. STEL: 2400 mg/m³ 15 minutes. NIOSH REL (United States, 10/2016). TWA: 250 ppm 10 hours. TWA: 590 mg/m³ 10 hours. OSHA PEL (United States, 6/2016). TWA: 1000 ppm 8 hours. TWA: 2400 mg/m³ 8 hours. toluene OSHA PEL 1989 (United States, 3/1989).
Titebond Heavy Duty Construction Adhesive Section 8. Exposure controls/personal protection Hand protection Body protection Other skin protection Respiratory protection : Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Considering the parameters specified by the glove manufacturer, check during use that the gloves are still retaining their protective properties.
Titebond Heavy Duty Construction Adhesive Section 10. Stability and reactivity Hazardous decomposition products : Under normal conditions of storage and use, hazardous decomposition products should not be produced. Section 11. Toxicological information Information on toxicological effects Acute toxicity Product/ingredient name Result Species n-hexane LC50 Inhalation Gas.
Titebond Heavy Duty Construction Adhesive Section 11. Toxicological information Not available. Classification Product/ingredient name OSHA IARC NTP toluene - 3 - Reproductive toxicity Product/ingredient name Maternal toxicity Fertility Development toxin Species Dose Exposure toluene - - - Rat Inhalation - Conclusion/Summary : Reproductive toxicant - female Teratogenicity Not available.
Titebond Heavy Duty Construction Adhesive Section 11.
Titebond Heavy Duty Construction Adhesive Section 12. Ecological information Toxicity Product/ingredient name Result Species Exposure n-hexane Acute EC50 0.89 mg/l Acute EC50 3.9 mg/l Acute LC50 2500 µg/l Fresh water Chronic NOEC 4.9 mg/l Chronic NOEC 2.8 mg/l Acute EC50 20.565 mg/l Marine water Acute LC50 6000000 µg/l Fresh water Acute LC50 10000 µg/l Fresh water Acute LC50 5600 ppm Fresh water Chronic NOEC 4.95 mg/l Marine water Chronic NOEC 0.016 ml/L Fresh water Chronic NOEC 0.
Titebond Heavy Duty Construction Adhesive Section 13. Disposal considerations cleaned thoroughly internally. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. United States - RCRA Toxic hazardous waste "U" List Ingredient CAS # Status Reference number Acetone (I); 2-Propanone (I) Toluene; Benzene, methyl- 67-64-1 108-88-3 Listed Listed U002 U220 Section 14.
Titebond Heavy Duty Construction Adhesive Section 15. Regulatory information U.S. Federal regulations SARA 302/304 Composition/information on ingredients No products were found. SARA 304 RQ : Not applicable.
Titebond Heavy Duty Construction Adhesive Section 15. Regulatory information Product name CAS number % Form R - Reporting requirements n-hexane acetone toluene 110-54-3 67-64-1 108-88-3 ≥10 - ≤25 ≥10 - ≤25 ≤10 Supplier notification n-hexane toluene 110-54-3 108-88-3 ≥10 - ≤25 ≤10 SARA 313 notifications must not be detached from the SDS and any copying and redistribution of the SDS shall include copying and redistribution of the notice attached to copies of the SDS subsequently redistributed.
Titebond Heavy Duty Construction Adhesive Section 16. Other information Hazardous Material Information System (U.S.A.) * Health 3 Flammability 3 Physical hazards 0 Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks. Although HMIS® ratings and the associated label are not required on SDSs or products leaving a facility under 29 CFR 1910.1200, the preparer may choose to provide them.
Titebond Heavy Duty Construction Adhesive Section 16.