User Guide

Q:The module does not function at all.
A:1. Make sure that the wiring is correct at first by watching amazon
page videos.
2.Check whether the software is successfully installed. Console
window print ” Grbl 1.1f ['$' for help]” is successful.
3. Click the jog to check if the machine move.If the jog does not turn
green, please click the lock button.
3.Enter M03 S100 to check if the module will light up. If it is on,
enter M05 to close and open the test picture for engraving. If it can't
light up. Enter $32=0, turn off the software and restart the operation.
4.If it still does not work, please contact customer service for
technical support.
Moudle Part