User Guide

ManualsBrandsTitoe ManualsMilling machinesUpgrade Version CNC Pro-M Engraving Machine with 3000mW 3W Module 3 Axis GRBL Control DIY Router Kit Machine with 2 Pack Acrylic Baffles+ Extension Rod +Offline Controller Board

1

2

3

4

5

6

7

8

9

Q:The Module is engraving extra lines?

A:1.Check if your X.Y.Z can move normally.

2.When using a Laser the Grbl motherboard needs to be set into Laser

mode to prevent this. Send a $32=1 command from the console pane.

When you replace the spindle motor send a $32=0 command.