Manual

INSTALLATION & OPERATION MANUAL
FFD, FFDR, FFDRA Models
Fan Filter Unit IOM
Installation & Operation
Critical Operation Conditions of FFD, FFDR, & FFDRA models
1. Touching of the HEPA filter will damage it, voiding the warranty on the filter. The screen is only to protect against an
accidental ‘touch’ of the filter. Never place a hand or tool on the filter. Never lie filter face flat down on a surface always
have filter on its side to protect from damage.
2. Prior to powering the unit, verify voltage on label and that the unit has been wired into the correct voltage. The serial
number label on the top of the unit has the required voltage.
3. To insure you order the proper replacement parts or complete unit, record the part number and serial number. This
information is located on the serial number label, located adjacent to the electrical box. If you can’t locate the Sales Order
Number, please contact Titus for this information. Once obtained, record the information for reference.
3
Warning
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
A. Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and
standards, including fire-rated construction.
B. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.
C. If this unit is to be installed over an area using liquid, such as water or chemical cleaning solutions, it must be marked as
appropriate for the application.
D. Use this unit only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer.
E. Before servicing or cleaning the unit, switch power off at unit service panel and lock service panel to prevent power from
being switched on accidentally.