Specifications

INSTITUTION : 2019.07.16
SPECIFICATION
(TRANSMITTER REMOCON)
MODEL NO:
S6V-BL
REFORM :
DECISION : 2019.07.16
21
REMOTESOLUTION.CO.,LTD
5
3. ENVIRONMENT CHARACTERISTICS
3-1 Fundamental performance
A. Operating Current
B. Stand-by Current
C. Operating Voltage
D. Performance
E. Exterior
3-2 Dry Heat Test
A. Temperature : 60 ± 3℃
B. Humidity : 5 ~ 10%
B. Time : 96 Hrs.
3-3 Damp Heat Test
A. Temperature : 65 ± 3℃
B. Humidity : 90 ~ 95%
B. Time : 96 Hrs.
3-4 Temperature Cycling
A. Temperature : 65℃ ~ -10℃ / 3Cycles
B. Time : 3Hrs
3-5 Cold Test
A. Temperature : -10 ± 3℃
B. Time : 96 Hrs.
3-6 Stressing Chip-On-Board
One cycle of -40℃ uncontrolled relative humidity (rh) for 8 hours; 70C°at
10% rh for 8 hours; 70 C° at 90% rh for 8 hours and room
ambient until stable. Temperature ramp rate is 2 C° per minute.
3-7 Vibration Test
A. Vibration width : 1.5mm
B. Sweep Frequency : 10~55 Hz
C. Test Period : 6 Hrs / each direction (X Y Z)
3-8 ESD Test
A. ± 8㎸,1㎐,10 Times Contact discharge
B. ± 16㎸,1㎐,10 Times Air contact discharge
3-9 Life Time
A. Once Per second for 500,000 cycles