Owner`s manual

14
2. Tivoli EQ (found in main menu): Use the pq and Select buttons to adjust the Bass and Treble.
The adjusted values will be shown in “User EQ”. Use the pq buttons to turn Loudness On or
Off. Turning Loudness on when listening at low volume levels is recommended since it boosts
high and low frequencies resulting in a more natural sound. Use the pq and Select buttons
to activate any one of the pre-set EQ settings. Selecting a preset EQ will over-ride any adjust-
ment made to the Bass and Treble settings but Loudness will be unaffected. The “Flat” EQ
restores the audio settings of the NetWorks to factory defaults, meaning Bass and Treble will
be re-set to zero. However, if the Bass and Treble had been adjusted, those settings will still be
shown in “User EQ”. Simply selecting “User EQ” will reactivate the Bass and Treble settings.
In the EQ menu page, the numbers to the right hand side indicate the bass and treble settings.
3. Favorites (found under “Station list” in Internet radio mode only):
In addition to storing five presets for Internet radio, you can save virtually an unlimited number
of additional Internet stations in a menu called “Favorites”. While listening to an Internet station
or Podcast you wish to save in Favorites, press and hold the right arrow button. Select whether
you wish to store the station to Favorites. When you enter the Favorites list, select “Stations”
or “Podcasts” (if you have also saved Podcasts). Use the arrow buttons to locate the station/
Podcast you want. Press the Select button to play the station/Podcast, or press and hold the
right arrow key for the option to delete the station/Podcast.
4. My Added Stations (found in “Stations” under “Station list” in Internet radio mode only):
Located under the “Stations” category, this will list any Internet stations you request Tivoli Audio
to add to your radio only.
5. Station Search (found in “Stations” under “Station list” in Internet radio mode only:
Use the pq buttons to change character pages. Use the left and right arrows to highlight
characters and the Select button to enter the character.
a) the ‘<’ symbol = back space if you make an error
b) the ‘ ’ symbol = enter station name
c) the ‘C’ symbol = cancel process and return to previous menu
When selecting a blank space it will be represented by a blank space followed by an
underscore indicating the position of the next character.
6. Podcasts (found under “Station list” in Internet radio mode only): Podcasts are essentially
recordings of a wide variety of media, especially radio programs and audio from TV broadcasts,
though there are certainly many more categories. They are a convenient way of listening to past
programs you may have missed or wish to listen to again.
7. Local Stations (found under “Stations” in Internet radio mode only): This allows faster
access to stations in your State rather than searching by Location.
8. Clock and Date (found under “Settings”): To have the time and date set automatically, select
“Auto Clock/Date” and then choose “Update from Internet” or “Update from FM” (RDS). Then
select your Time Zone and indicate whether you want Daylight Saving Time (DST) on or off.
Note the Time Zone and DST settings only work when “Update from Internet” is selected. For
any of the auto updates to work, you must have consistent reception of the Internet or FM
RDS with a time/date signal provided. Tivoli Audio is not responsible for inaccurate time/date
information provided by the auto clock/date. To set the time manually, select “No Update”, and
then select “Clock” under the “Settings” menu using the pq and the Select buttons to set
the hour. Repeat to set the minutes and press Select to save. Within this same “Settings” menu
are additional options to set the date, clock format (time shown as digits or as a clock face in
Off mode), and 12/24 hour mode.
9. Language (found under “Settings”): Use the pq and Select buttons to choose your language.