Owner`s manual

19
TROUBLESHOOTING:
If you are unable to get the NetWorks radio to connect to your WiFi network and you have a PC,
confirm your PC can connect to your WiFi network to verify it is operational.
Check that your network doesn’t restrict connections to particular MAC addresses. View the
NetWorks’ MAC address in the main menu under “Info”, shown as “Radio ID”.
Check that a DHCP server is available, or that you configured a static IP address on the NetWorks.
You can configure a static IP address on the NetWorks in the main menu under “Internet Setup”.
Check that your network’s firewall isn’t blocking any outgoing ports.
If using an Ethernet cable, be sure the cable is fully inserted into the NetWorks Ethernet jack and
you’ve selected “Wired” under “Manual settings” In “Internet Setup”.
In the rare event you encounter an operational problem, unplug the NetWorks for a few seconds
and plug it back in. If this fails to cure the problem, try the factory re-set.