Operation Manual

8 – ENGLISH

2. LCD:

: Volume level (center digits): Time AUX: Auxiliary

: Sleep timer : Reception level ST: Stereo

: Snooze timer DAB: DAB/DAB+/DMB band M: Mono

: Alarms 1 and 2 FM: FM band T: Manual tuning mode

GUIDE TO FEATURES (REAR PANEL)

1. 12VDC/1000mA: This input is for use with

an optional 1A fused, 12VDC adapter. The

adapter must be 5.5mm/2.1mm center

positive.

2. EXTERNAL ANTENNA: An external

telescoping antenna is afﬁxed to this

input and is not intended to be detached.

Adjust for best reception. For more, see

the section marked “Digital Radio/FM

Reception”.

3. HEADPHONE OUT: Connect a headset

(not included) to this variable stereo out-

put for private listening. The headset will

mute the primary speaker. The headset’s

volume is adjusted using the control

wheel or the remote control. The remote’s

“Mono” button also affects this output.

This stereo out-put accepts a 3.5mm stereo male mini connector. Avoid using headphones

at high volume levels to prevent possible hearing damage.

4. PRESETS 1-5: Press and hold to store the currently tuned station. Press brieﬂy to recall the

station associated with that speciﬁc preset. In FM mode, the preset number will be indicated

on the display. There are 5 presets for each band.

5. R-SPR: Connect the male RCA cable from the optional Tivoli Audio Model 10 Speaker to

this female RCA output. Make sure the Stereo/Mono setting is set to Stereo by pressing the

Mono button on the remote control and be sure the display shows “ST” for stereo and not

“M” for mono.

6. SUB OUT: Connect the audio cable from the optional Tivoli Audio Model Subwoofer (or other

compatible subwoofer) to this output. This jack accepts a 3.5mm stereo male mini connector.

7. REC OUT: Connect a cassette deck’s audio input (or other recording device) to this ﬁxed level