Operation Manual

11 – ENGLISH
3. BALANCE (FOUND UNDER TIVOLI EQ): As the Balance control has no affect when the
Model 10+ is set to Mono, this setting should remain in the center position, except when the
optional Model 10 Speaker is connected and Stereo mode is selected via the remote control’s
“Mono” button. Though we still recommend the center balance setting in Stereo mode, you
may use the pq buttons to adjust the balance to your liking, then press the Select button to
store any change.
4. TIME (FOUND UNDER SETTINGS):
Set 12/24 hour:
Press the Select button and use pq and Select buttons to choose 12 or 24 hour clock format.
Set time/date:
Press the Select button and use pq and Select buttons to adjust the hour and then minutes,
immediately followed by the date. You must also set the Auto update to “No update”. For more,
refer to “Auto update” below.
Auto Update:
Press the Select button and use pq and Select buttons to choose between “Update from any”,
“Update from DAB” (also DMB), or “Update from FM” (RDS). For any of the auto updates to
work, you must have consistent reception of DAB or FM RDS with a time/date signal provided.
It could take up to a minute or more for the clock to update. Tivoli Audio is not responsible for
inaccurate time/date information provided by the auto update signal.
To set the clock manually, select “No Update”, and then select “Set Time/Date” under the
“Time” menu using the pq or tu buttons and the Select button to set the hour. Repeat to
set the minutes and press Select to save. Within this same “Time” menu are additional options
to set the date format, and 12/24 hour clock mode.
NOTE: During a power outage, the alarm time(s) and clock will be maintained by an integrated
back-up memory. When “Auto update” is set to “Update from any”, the radio may find the
clock signal from the last listened station, even when the Model 10+ is in standby.
Set date format:
Press the Select button and use the pq and Select buttons to choose the date format
you prefer.
5. BACKLIGHT (FOUND UNDER SETTINGS):
Timeout:
The backlight level can be constant regardless of whether you are using any controls on the
Model 10+ or not (this is the way the Model 10+ is configured from the factory), or you can
customize the backlight to automatically change to a “Dim level” setting after a fixed period
of time for as long as no controls are being used. Once a control on the unit or the remote is
pressed, the normal backlight level is restored.
Press Select and use the pq and the Select buttons to set the amount of time it will take for
the backlight to change to the dim level from 10, 20 ,30, 45, 60, 90, 120, or 180 seconds, or
to keep the timeout feature Off.
On Level:
Press Select and use the pq and Select buttons to choose the intensity of the backlight.
Dim Level:
If you selected a time for the backlight to change to a dim setting under “Timeout”, then press
Select and use the pq and Select buttons to choose the intensity of the backlight when
it changes to this dim setting. Setting the Dim level to “Off” may be desirable if the display
backlight is bothersome while sleeping.
6. LANGUAGE (FOUND UNDER SETTINGS): Press Select and use pq and Select buttons to
set your language.