Operation Manual

English

How to set the alarm:

1. With the Model 10 powered on, access the alarm menu by brieﬂy pressing the Alarm button on

the remote control.

2. Alarm 1 is shown ﬁrst. Press the Alarm button or use the pq and Select buttons to choose

between Alarm 1 and Alarm 2. Note: At any point you can navigate through the alarm menu

by using the  buttons.

3. Use the pq buttons to set/change the hour, then press Select. Repeat this process to set/

change the minutes.

4. Use the pq and Select buttons to set the alarm on or off.

5. Use the pq and Select buttons to set the alarm schedule (how often you want the alarm to

wake you up).

6. Use the pq and Select buttons to set the source you wish to wake to. If you choose FM or

AM, use the tune +/- buttons to tune a station, or press one of the preset buttons if you have

set stations to the presets. Be sure to set a station that will be broadcasting during the time

you wish to wake.

7. Lastly, use the pq buttons to set the volume level of the alarm. The alarm icon will show on

the display if the alarm is set to wake

8. Repeat this process for Alarm 2 if desired.

If you make a mistake at any point in the process, press the  button on the remote and begin again.

Note: Your settings will be saved automatically if you exit from the alarm menu at any stage.

Also, if no action is taken after 10 seconds while in the alarm menu, the display will revert to

its previous state and any alarm changes will be saved automatically.

Power Loss: Should power be lost, or the Model 10 becomes disconnected, the alarm time

will be saved but the Model 10 alarm cannot sound if there is no power.

ALARM OPTIONS:

Alarm off: To stop the alarm, press the Alarm or Power button on remote, or press and hold the

Multi-Function Control Wheel on top of the unit.

Alarm Quick Set: With the Model 10 in standby, repeatedly press the alarm button brieﬂy to toggle

each alarm on or off.

Snooze: To activate Snooze while the alarm is sounding, press the Snooze button on the remote,

or brieﬂy press the Multi-Function Control Wheel on top of the unit. If you press the Snooze button

again it will cancel snooze. Note: The Snooze time is not adjustable.