Operation Manual

English

TV, connect said device’s audio output to this stereo input and change the source to Auxiliary.

This stereo input accepts a 3.5mm stereo male mini connector. Note you may need to adjust

the volume level differently for an auxiliary device than the level used for radio listening.

10. POWER CORD INPUT: Firmly insert the included power cord. When unplugging the power

cord from the wall outlet, always grasp it by the plug and not the cord. We recommend the

use of a power strip with surge protection. Be sure your region’s voltage is consistent with the

voltage indicated on the rear panel under the power cord input. Tivoli Audio is not responsible

for damaged caused by incorrect voltage.

Guide to Features (Remote Control):

1. POWER: Press brieﬂy to power the Model 10 on. The radio will power on to the last source

used. Press to power the Model 10 off.

2. MUTE/SNOOZE: Press to mute the audio

(the icon will ﬂash) while the unit is play-

ing; press again or adjust the volume to

restore sound. Press to mute the alarm

for 7 minutes after the alarm sounds. The

alarm will re-sound after 7 minutes. A

icon will show on the display when

Snooze is active. The Snooze time is

not adjustable.

3. ALARM: With the Model 10 powered on,

use the pq and Select buttons to adjust

and set the alarms. For a complete step-

by-step guide, refer to the section titled

“How to set the Alarm.”

4. SLEEP: Press to start the 20 minute

sleep timer. The display will indicate the

remaining sleep time and automatically

power the radio off after 20 minutes. A

small clock face [ ] will show on the

display when the Sleep timer is active.

Press again to cancel the sleep timer.

The amount of sleep time is not adjust-

able. Sleep can be activated regardless

of whether the Model 10 is on or off.

5. SOURCE: Press to change sources.

6. INFO: Press repeatedly to view basic settings information.

7. PRESETS 1-5: Press and hold to store the currently tuned station. Press brieﬂy to recall the

station associated with that speciﬁc preset. The preset number will be indicated on the display.

There are 5 presets for the FM band and 5 presets for the AM band.

8. VOLUME +/–: Press the + button to raise the volume level or the – button to lower the volume

level. If the audio ever sounds distorted, lower the volume level to avoid damaging the speaker.

Adjusting the volume while the Model 10 is muted will cancel the muting.

MONO