Operation Guide

TZ-815
1
Key Definition
1. LED screen
2. Launch button
3. Up button
①
②
③
④
⑤
1. LED Screen:
Beep mode: When this symbol is displayed, press the Y button to activate a
Beep tone on the Receiving Collar.
Vibration Mode: when this symbol is displayed, press the Y button to
activate Vibration. Use the Up/ Down buttons to adjust the intensity of the
vibration from 1 to 9.
Static Shock Mode: when this symbol is displayed, press the Y button to
activate Static Shock. Use the Up/ Down buttons to adjust the intensity of
the shock from 1 to 9.
6
2. Up/ Down buttons: they are used to adjust the Intensity of the Vibration
or Shock from the lowest level 1 to the highest level 9.
3. Collar button: press this button to change between the 1st and 2nd
Receiving Collar (if applicable).
4. Launch button: when you have finished choosing the correct mode,
press the launch button to start.
5. Mode button: use this button to select mode among Beep, Vibration or
Static Shock.
6. Charging port: plug the USB charging cable into the port to charge the
Remote Transmitter.
* Operating Frequency: RF433 MHZ
3.7V 250mAh for the Receiving Collar
* Contact points: 2 pairs of metal contacts to be chosen to suit the length of your
dog's hair.
* Mini Spanner: a tool to screw/unscrew contact points on the electrodes.
On/O Button (Press 1 Sec.)
Encode Button (Press 3 Sec.
Green indicator led flash, meanwhile
press Y button on Transmitter,then
Green led is steady on)
Contact Points:
Deliver vibration / safe static correction
Charging port:
Charge the Receiving Collar
Indicator light
7 8
Features
1. Rechargeable Remote Transmitter
2. Rechargeable and Waterproof Receiving Collar
3. 1000 feet remote control range between Remote Transmitter and
Receiving Collar.
4. Beep Mode activates a correcting tone on the Receiving Collar
5. Adjustable vibration intensity level from 1-9 level
6. Adjustable static shock intensity level from 1-9 level (optional)
The Receiving Collar will go into Standby Mode if it’s idle for more
than 5 mins. Any movements will activate the Receiving Collar.
The Transmitter will go into Standby Mode ( will be light o with 30s,
will be light o with 1min).
Press any button to re-activate it from Standby mode.
8. The Remote Transmitter can be used to control up to 2 Receiving
Collars.
9. 2 pairs of metal contacts (1 short and 1 long) are included to suit the
length of your dog’s hair.
How does the Rechargeable and
Waterproof Dog Training Collar Work
The Rechargeable and Waterproof Training Collar has been proven to be
a safe, comfortable, and eective training system for all dogs weighing
over 15lbs. This system allows you to control your dog within a range up to
1000 feet . At the press of a button, the Remote Transmitter sends signal
to the Receiving Collar and activates a Beep, a Vibration or a Static Shock
correction output. By using the Training Collar properly, you can correct
much of your dog’s undesired behavior and teach basic and advanced
obedience commands.
Important: the Training Collar has an eective range up to . 1000 feet
Hold the Remote Transmitter horizontally away from your body to achieve
the optimum range. Terrain features, weather, vegetation, transmission
from other radio devices and other factors may aect the range of the
Remote Transmitter.
3
Rechargeable and Waterproof
Remote Dog Training Collar
Operation Guide
Please read the entire guide before using
Precautions
CAUTION
DO NOT use this product for aggressive dogs or vicious animals.
Risk of skin damage.
It’ s important to fit the collar properly. A collar that is fitted too tightly or
worn for too long may harm your dog’s skin. This condition, which ranges
from redness to pressure ulcers, is commonly known as bed sores.
Do not let your dog wear the collar for more than 12 hours per 24-hour
period.
If possible, gently reposition the collar on your dog’s neck every 1 or 2
hours.
Never attach a lead to the Receiver Collar, as this would cause excessive
pressure on the contact points.
When using a separate collar to connect a leash, please ensure that it
does not put excessive pressure on the electronic collar.
Examine your dog’s neck daily for signs of chafing or soreness.
If a rash or sore is found, stop using the collar till the injured skin has
been healed.
If the condition persists for more than 48 hours, consult your veterinarian.
If possible, please use the Beep Mode or Vibration Mode at first, then can
try Static shock function.
4
Thanks for choosing the Rechargeable and Waterproof
Remote Dog Training Collar.
Our mission is to provide you with the safe tools and
techniques to train your dog.
2 Features
3 How Does the Rechargeable and Waterproof Training Collar Work
4 Precautions
5 Components
6 Key Definition
8 Operation Guide
Step 1 Preparing the Remote Transmitter
Step 2 Preparing the Receiving Collar
Step 3 Encoding the Remote Transmitter and Receiving Collar
Step 4 Testing the Rechargeable and Waterproof Training Collar
Step 5 Fitting the Receiving Collar to your dog
12 Frequently Asked Questions
14 General Tips for Training Your Dog
15 Common Weights of Dierent Dog Breeds
Contents
Components
5
Remote Transmitter Adapter
USB Charging Cable
Test Light
Receiving Collar
Mini Spanner
Contact Points
TZ-815
⑥
Please ensure that you charge both the Receiving collar and the Remote
Transmitter before using!
Dog 1
Dog 2
* Lithium battery: 3.7V
250mAh for the Remote Transmitter
2
Step
Preparing the Receiving Collar:
Charging the Receiving Collar
1. Remove the rubber cover and plug the USB Charging Cable
into the charging port.
2. Plug the Adapter into a standard outlet.
3. The red LED will keep lighting when the Receiving Collar is
charging.
4. The green LED will be lighting once it's fully charged with 1.5
hours.
5. Remove the Charging Cable, and put back the rubber cover.
7. Power saving modes:
1
Step
Operation Guide
Preparing the Remote Transmitter:
Charging the Remote Transmitter
1. Plug the USB Charging Cable into the Charging port.
3. Plug the Adapter into a standard outlet.
4.The number in LCD screen will be lighting circularly when
charging.
5. The LED screen will show as - once its fully charged with 2.5
hours. Remove the USB Charging Cable.
Low battery indicator: The LED screen will show as P and flash
30seconds, then transmitter will be turned o automatically.
How to use the Remote Transmitter
1. Press any button to activate it.
2. Use the button to cycle through dierent modes. The LED screen
will display which mode is currently actived ( ).
3. Press the Up/Down ( ) buttons to set the intensity of the vibration
or shock.
Power Saving Mode: the Remote Transmitter will go into Standby Mode if
it is idle for 1 min. The LED screen on the Remote Transmitter will not
display anything in this case( will be light o with 30s, will be light o
with 1min), press any button to re-activate it.
Low battery indicator: The red LED will be flash with 30seconds, then
Receiving Collar will be turned o automatically.
4. Down button
5. Mode button
6. Dog button
7. Charging port
1-9 level
Beep mode
Vibration mode
Static shock mode
7
To extend the battery life of this product, please charge them per month if
you do not intend to use it for a long period of time.
How to change the contact point
to the Receiver Collar
2