System Recovery Guide for ` Tizzbird™ Smart TV Box TIZZBIRD™ F10/ F11/ F13/ F20/ F30 Smart TV Stick N1 October 22, 2012 ChipAlive Co. Ltd. All rights reserved. www.tizzbird.
Annex C. How to Repair Booting Failure of TizzBird This documentation is intended to provide repairing guide in case of booting failure of TizzBird. TizzBird F10/F11/F20/F30 is based on Android Gingerbread version while TizzBird N1 is ICS. Detailed specifications can be found at given package or http://www.tizzbird.com. This repairing method is only applied from firmware revision 2.0.6 for F10/ F11/ F20/ F30 and revision 3.0.4 for N1/ F13. C.1 Abstract The symptom of booting failure looks like as below.
C.2 Repairing by System Recovery Mode C.2.1 Preparation 1) Prepare USB flash drive which has more than 128MB of free space. 2) Download the latest upgrade firmware from Tizzbird WEB (http://www.tizzbird.com) according to your device. Normally the name of upgrade package is something like “Tizzbird_mmm_update_vvv.tzbird”. “mmm” means model name like “F3x”, “F20”. “vvv” means update version and date like “V2_06_2102115”. 3) Copy downloaded firmware to root folder of USB flash drive. Then rename it “update.
B. N1/ F13. (Require revision 3.0.4 or later firmware) 4) There are four menus. (three on F10/ F11/ F20/ F30) If you want to factory reset status, then select “wipe data/ factory reset”. This will help the situation when some applications you installed cause a problem. 5) Apply “wipe cache partition” first. 6) To make the device reboot again with fresh image, put the USB flash drive on the USB port, then select “apply update from /usb”. Please make sure that you have update.zip on the USB drive.
7) On the following screen, select “update.zip” on the drive. 8) The system will erase whole area of internal flash and start to update like below picture. The progress bar will show the current progress. All rights reserved. www.tizzbird.