Operation Manual

12 Initial Screen

12.1 Turning On Power

Press

<POWER>

button on the remote or press the power key at front panel to turn on the

power. The unit will start boot-up.

Red color LED will blink fast during the booting. LED will turn into BLUE during normal

operation after booting.

12.2 Audio Settings

Audio output should be configured as “Digital” mode to connect AV receiver. Select

<Settings Browser>  <Audio & Visual>  <Audio Output>, then press

<OK>

button.

Select the appropriate audio output port between HDMI, Digital (S/PDIF) and Analog (RCA),

then select “Digital” at next screen.

When “Digital” mode is selected, the pop-up will come out like following picture. The each